Electrical info needed

[Blaze]

Thats sounds good. Don't want to limit myself and have to add more when i get or run more toys! what size wire goes from the breaker in the sub panel to the outlet?

[Brian Ski]

Thats sounds good. Don't want to limit myself and have to add more when i get or run more toys! what size wire goes from the breaker in the sub panel to the outlet?

Technically... If you are using Romex (NM) wire it should be #6 copper...

But if you run it in conduit you can use #8 copper THHN it is usually black (single conductor) would have to pull the wires through one at a time. Make sure you use the plastic bushings where the conduit enters the breaker box or outlet box.

For a welder you are probably using a 3 conductor, 50 amp plug. 2 hot wires (from the breaker) and a ground.

[Blaze]

Thank you, got a list together, got to price this out