The Hobart MIG I have will run 023, it's what I normally have loaded, I also have some 030 on hand, but it's only a 125 so the 035 hasn't really found a place.

I have 1/16 and 3/32 ER70S2 (or was it 6... it's early) for the TIG, plan on picking up the same in 308L, 309L and 316L for sure, as well as 4043 and 5356.

Picked up a 10lb of 6013 or 6014 last week for a job, I'd rather the 7018 but no oven yet.