Share
Results 1 to 20 of 38

Thread: Gas Saver set?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Apr 2012
    Location
    Washington State
    Posts
    723

    Default

    Quote Originally Posted by Rambozo View Post
    Jody offers some similar advice with a screen or scotchbrite as an additional diffuser to allow even more tungsten stickout. That would lead me to believe that it further smooths the gas column into a more laminar flow.
    What kind of scotchbrite is he using? A quick google and it looks like 3m is using scotchbrite for a whole line of products. If someone uses scotchbrite closer to the arc, do they even need a gas lens collet body? Looks like the close the diffuser to the arc, the better it works.
    Is it OK to want to break something just so that you can weld it back together?

    Everlast PowerTIG 185 Micro IGBT AC/DC Welder

  2. #2

    Default

    Quote Originally Posted by undercut View Post
    What kind of scotchbrite is he using? A quick google and it looks like 3m is using scotchbrite for a whole line of products. If someone uses scotchbrite closer to the arc, do they even need a gas lens collet body? Looks like the close the diffuser to the arc, the better it works.
    Near the bottom http://www.weldingtipsandtricks.com/...stainless.html
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  3. #3
    Join Date
    Apr 2012
    Location
    Washington State
    Posts
    723

    Default

    Quote Originally Posted by zoama585 View Post
    I read that part before I posted and a couple of times after you linked to it. Scotch-Brite is a brand name for a whole host of products. I don't think Jodi was referring to the Scotch-Brite Pet Hair Flat Surface Roller! I might be missing something obvious - more specific please!
    Last edited by undercut; 06-18-2012 at 02:23 AM.
    Is it OK to want to break something just so that you can weld it back together?

    Everlast PowerTIG 185 Micro IGBT AC/DC Welder

  4. #4
    Join Date
    May 2012
    Location
    Disneyland
    Posts
    2,662

    Default

    Quote Originally Posted by undercut View Post
    I read that part before I posted and a couple of times after you linked to it. Scotch-Brite is a brand name for a whole host of products. I don't think Jodi was referring to the Scotch-Brite Pet Hair Flat Surface Roller! I might be missing something obvious - more specific please!
    Scotch brite has become a sort of generic term for the fiber abrasive pads made by 3M as well as other companies. Few of the consumer products that bear that name are what you are looking for. Any good general hardware store will have several grades of plain scotch brite pads about 1/4" thick. I think there are plain consumer pads, but most are bonded to sponges or plastic handles and are not what you are after.
    Here are examples of the plain pads.
    http://www.mcmaster.com/#3m-scotchbr...e-pads/=i0vxhi
    But anything even close to that will work as you are not using it for it's abrasive qualities.
    Long arc, short arc, heliarc and in-the-dark!

  5. #5
    Join Date
    Apr 2012
    Location
    Washington State
    Posts
    723

    Default

    Quote Originally Posted by zoama585 View Post
    He never specifies, but he talks about cleaning aluminum with a scotch brite pad and then talks about cutting a piece of scotch brite pad to use as a diffuser. He uses it on mig guns as well, reducing gas usage by 5 cfm.
    Quote Originally Posted by Rambozo View Post
    Scotch brite has become a sort of generic term for the fiber abrasive pads made by 3M as well as other companies. Few of the consumer products that bear that name are what you are looking for. Any good general hardware store will have several grades of plain scotch brite pads about 1/4" thick. I think there are plain consumer pads, but most are bonded to sponges or plastic handles and are not what you are after.
    Here are examples of the plain pads.
    http://www.mcmaster.com/#3m-scotchbr...e-pads/=i0vxhi
    But anything even close to that will work as you are not using it for it's abrasive qualities.
    Thanks guys. I did do a google and found one instance where someone said they used the white scotchbrite. Interesting concept as the fibers aren't uniformly manufactured. Cheers!
    Is it OK to want to break something just so that you can weld it back together?

    Everlast PowerTIG 185 Micro IGBT AC/DC Welder

  6. #6

    Default

    Quote Originally Posted by undercut View Post
    I read that part before I posted and a couple of times after you linked to it. Scotch-Brite is a brand name for a whole host of products. I don't think Jodi was referring to the Scotch-Brite Pet Hair Flat Surface Roller! I might be missing something obvious - more specific please!
    He never specifies, but he talks about cleaning aluminum with a scotch brite pad and then talks about cutting a piece of scotch brite pad to use as a diffuser. He uses it on mig guns as well, reducing gas usage by 5 cfm.
    Last edited by zoama; 06-18-2012 at 03:18 AM.
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  7. #7

    Default

    have to try that with my mig spool gun a diffuser would really help welding aluminum tried my new everlast spool gun today . only had a rolls of 5356 wire have to get some 4043 since welds nicer . took a pic have to get use to not having a speed control on gun like my last one i had .Click image for larger version. 

Name:	engine rebuild and installs 002.jpg 
Views:	353 
Size:	144.9 KB 
ID:	7155 not bad since i did not clean the aluminum before welding it plus is only 1/8 aluminum
    EVERLAST 250 EX , EVERLAST I-MIG 205 , EVERLAST spool gun NOW have 2 EVERLAST POWER PLASMA 50 plasma cutter's , LINCOLN 175HD MIG WELDER , VICTOR TORCH SET and many more tools to many to list

Similar Threads

  1. 'Gas saver' for 9 and 29 series
    By BillC in forum TIG Welding (GTAW/GTAW-P)
    Replies: 13
    Last Post: 06-03-2016, 06:20 PM
  2. Using gas saver kits by c/k -input-
    By Frank in forum General Welding Questions
    Replies: 8
    Last Post: 06-29-2014, 02:02 PM
  3. 25' CK26 Torch w/ gas saver kit and Dinse connector
    By Injected65 in forum Buy, Sale or Trade
    Replies: 5
    Last Post: 04-09-2012, 04:24 PM
  4. Quick time saver tip.
    By A/C Guy in forum Other Custom Fabrications
    Replies: 5
    Last Post: 03-27-2011, 12:51 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •