I did this on a jeep. I cut the old ones out and put some new ones back in. The first on I had to run a tap through it, and the second worked perfect. The second nut I turned the bolt up and down several times while it cooled down.
Senior Member
I did this on a jeep. I cut the old ones out and put some new ones back in. The first on I had to run a tap through it, and the second worked perfect. The second nut I turned the bolt up and down several times while it cooled down.
Lincoln Eagle Engine Drive
Everlast MTS 250
Everlast Power Tig 225lx
HTP Mig 2400
Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
Miller Spectrum 375 Extreme Plasma cutter
Victor cutting torch
HF 20 Ton Shop Press
HF 4x6 Band Saw
HF Air Compressor
Northern Tool Drill Press
www.murphywelding.com
Posting Permissions
Reply With Quote