home made filter dryer
cheap 95 percent dessicant.
Senior Member
Last edited by Rodsmachineshop; 05-31-2012 at 04:53 AM.
EVERLAST 250 EX , EVERLAST I-MIG 205 , EVERLAST spool gun NOW have 2 EVERLAST POWER PLASMA 50 plasma cutter's , LINCOLN 175HD MIG WELDER , VICTOR TORCH SET and many more tools to many to list
Member
Thats a good idea Rod, may have to look into doing something like that in the future, can't ever have TOO dry of air right?
http://www.facebook.com/CBRMetalworks
'96 Tacoma V6 on 37's, full custom, built for racin!
Yamaha Rhino w/ 800 Rotax built for racin!
Miller 251 MIG
Everlast Powerplasma 60C with CNC plasma table
Looking for sponsors for KOH 2013 race!
Racin' Tacoma Build Thread
Senior Member
How do you change the desiccant in your home made dryer, Rod?Originally Posted by Rodsmachineshop
Is it OK to want to break something just so that you can weld it back together?
Everlast PowerTIG 185 Micro IGBT AC/DC Welder
Senior Member
has a bung plug on top to fill and a bung plug on bottom to drain litter use a piece of stainless steel welding rod to knock the stuff loose to fall out of bottom plug hole. oh this is not my dryer i am making one but using a different container so easier to change dissnent . was going to use water filter housing since easy to open and dump stuff and refill and there rated a 150 psi http://www.ebay.com/itm/10-whole-Hou...item35a33cdf15
Last edited by Rodsmachineshop; 05-31-2012 at 06:39 PM.
EVERLAST 250 EX , EVERLAST I-MIG 205 , EVERLAST spool gun NOW have 2 EVERLAST POWER PLASMA 50 plasma cutter's , LINCOLN 175HD MIG WELDER , VICTOR TORCH SET and many more tools to many to list
Senior Member
Couldn't see the plug on the bottom and couldn't imagine you taking it off the wall and shaking it upside down to get everything out! LOL
Is it OK to want to break something just so that you can weld it back together?
Everlast PowerTIG 185 Micro IGBT AC/DC Welder
Posting Permissions
Reply With Quote