Share
Page 1 of 2 12 LastLast
Results 1 to 20 of 29

Thread: Did you remove the "HOME" button?

  1. #1

    Default Did you remove the "HOME" button?

    I liked having that up there!! Makes impulse purchases easier!!
    PowerTig 250EX
    Power I-MIG 200
    Power Plasma 50
    It's what you learn, After you know it all, that counts!

  2. #2
    Join Date
    Apr 2012
    Location
    Washington State
    Posts
    723

    Default

    Quote Originally Posted by CGCINC View Post
    I liked having that up there!! Makes impulse purchases easier!!
    I liked being able to access the product pages easily too. Bit of a pain now when I want to check out specs ....
    Is it OK to want to break something just so that you can weld it back together?

    Everlast PowerTIG 185 Micro IGBT AC/DC Welder

  3. #3

    Default

    got to the bottom of page were it says everlast tig welders . welders ,plasma cutter,mig arc hit there will take you to everlast products site= i noticed the removed the home button also
    EVERLAST 250 EX , EVERLAST I-MIG 205 , EVERLAST spool gun NOW have 2 EVERLAST POWER PLASMA 50 plasma cutter's , LINCOLN 175HD MIG WELDER , VICTOR TORCH SET and many more tools to many to list

  4. Default

    I liked the home button also, now it's to the bottom of the page.
    PowerPro 205
    9" South Bend Lathe
    Enco Mill/Drill
    Evolution Rage 2

  5. #5
    Join Date
    Apr 2012
    Location
    Washington State
    Posts
    723

    Default

    Quote Originally Posted by Rodsmachineshop View Post
    got to the bottom of page were it says everlast tig welders . welders ,plasma cutter,mig arc hit there will take you to everlast products site= i noticed the removed the home button also
    I never thought to look there! Better at the bottom than what I was doing to get to the product pages ....
    Is it OK to want to break something just so that you can weld it back together?

    Everlast PowerTIG 185 Micro IGBT AC/DC Welder

  6. #6

    Default

    Quote Originally Posted by Rodsmachineshop View Post
    got to the bottom of page were it says everlast tig welders . welders ,plasma cutter,mig arc hit there will take you to everlast products site= i noticed the removed the home button also
    OHHH... Well that's ok. I don't care where it's at as long as I KNow where it is!!
    PowerTig 250EX
    Power I-MIG 200
    Power Plasma 50
    It's what you learn, After you know it all, that counts!

  7. #7

    Default

    Quote Originally Posted by CGCINC View Post
    OHHH... Well that's ok. I don't care where it's at as long as I KNow where it is!!
    It can be anywhere you want it to... just save a link to any page you want. If you're using ie9, add it to the "favorites bar" up top and rename it to whatever you'd like.
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  8. #8
    Join Date
    Apr 2012
    Location
    Washington State
    Posts
    723

    Default

    Quote Originally Posted by zoama585 View Post
    It can be anywhere you want it to... just save a link to any page you want. If you're using ie9, add it to the "favorites bar" up top and rename it to whatever you'd like.
    Oh I know there must be a dozen ways I can mimic what it used to do .... just kinda set in my ways and haven't been motivated enough to do anything about it.
    Is it OK to want to break something just so that you can weld it back together?

    Everlast PowerTIG 185 Micro IGBT AC/DC Welder

  9. #9

    Default

    lol i use firefox i just keep both open faster to switch back and forth hate internet explorer crappy browser and let viruses get by. i have 5 to 6 pages open at once so faster going back and forth
    EVERLAST 250 EX , EVERLAST I-MIG 205 , EVERLAST spool gun NOW have 2 EVERLAST POWER PLASMA 50 plasma cutter's , LINCOLN 175HD MIG WELDER , VICTOR TORCH SET and many more tools to many to list

  10. #10

    Default

    Quote Originally Posted by Rodsmachineshop View Post
    lol i use firefox i just keep both open faster to switch back and forth hate internet explorer crappy browser and let viruses get by. i have 5 to 6 pages open at once so faster going back and forth
    You don't run an anti virus ?
    I spend a lot of time on the web and never had a virus. There's a lot of BS floating around in the browser wars.
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  11. #11

    Default

    yes avast antivirus its free and the best out of all the virus programs i have used . plus i have boot anti virus programs that work great
    Last edited by Rodsmachineshop; 06-14-2012 at 12:37 AM.
    EVERLAST 250 EX , EVERLAST I-MIG 205 , EVERLAST spool gun NOW have 2 EVERLAST POWER PLASMA 50 plasma cutter's , LINCOLN 175HD MIG WELDER , VICTOR TORCH SET and many more tools to many to list

  12. #12

    Default

    Not sure why guys removed it .. but i will ask to add it back where it was !
    Oleg Gladshteyn
    Phone: 650 588 8082 / 877 755 WELD
    Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
    Email: oleg@everlastwelders.com
    Website www.everlastgenerators.com

    www.linkedin.com/pub/oleg-gladshteyn/48/b08/875

  13. #13
    Join Date
    Apr 2012
    Location
    Washington State
    Posts
    723

    Default

    Quote Originally Posted by zoama585 View Post
    You don't run an anti virus ?
    I spend a lot of time on the web and never had a virus. There's a lot of BS floating around in the browser wars.
    I run firefox too but also have an addon that prevent scripts from running. I've never had a virus .... meanwhile, I know of people who have caught a virus just by browsing the web. Probably pressed a button they shouldn't have but don't really know what they did and I certainly don't want to duplicate it myself!
    Is it OK to want to break something just so that you can weld it back together?

    Everlast PowerTIG 185 Micro IGBT AC/DC Welder

  14. #14

    Default

    ever get a nasty virus the only program that will remove it is combofix . I keep a copy on cd of it if ever have to use it . what it dose is when opened from cd it reboots computer and stops windows from opening then scans computer and catch the virus
    EVERLAST 250 EX , EVERLAST I-MIG 205 , EVERLAST spool gun NOW have 2 EVERLAST POWER PLASMA 50 plasma cutter's , LINCOLN 175HD MIG WELDER , VICTOR TORCH SET and many more tools to many to list

  15. #15
    Join Date
    Apr 2012
    Location
    Washington State
    Posts
    723

    Default

    Quote Originally Posted by Rodsmachineshop View Post
    ever get a nasty virus the only program that will remove it is combofix . I keep a copy on cd of it if ever have to use it . what it dose is when opened from cd it reboots computer and stops windows from opening then scans computer and catch the virus
    Never heard of it until now. Thanks for the tip.
    Is it OK to want to break something just so that you can weld it back together?

    Everlast PowerTIG 185 Micro IGBT AC/DC Welder

  16. #16

    Default

    Quote Originally Posted by CGCINC View Post
    Did you remove the "HOME" button?
    And I thought it was me... I swore it was there before... The link I have to Everlast goes right to the forum... I just open up another page and erase the back of the url behind .com. Just easier than having to think... Will look for it at the bottom of the page.
    Shade tree MIG welder.
    Now a Shade tree TIG welder.

  17. #17

    Default

    Quote Originally Posted by Rodsmachineshop View Post
    ever get a nasty virus the only program that will remove it is combofix . I keep a copy on cd of it if ever have to use it . what it dose is when opened from cd it reboots computer and stops windows from opening then scans computer and catch the virus
    Haha... you must be using windows XP ?
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  18. #18

    Default

    no windows 3.1
    EVERLAST 250 EX , EVERLAST I-MIG 205 , EVERLAST spool gun NOW have 2 EVERLAST POWER PLASMA 50 plasma cutter's , LINCOLN 175HD MIG WELDER , VICTOR TORCH SET and many more tools to many to list

  19. #19

    Default

    Quote Originally Posted by Rodsmachineshop View Post
    no windows 3.1
    Join us in the 21st century.
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  20. #20

    Default

    lol . yes use windows xp have to since most my shop repair manuals and diagnostic programs only work with windows xp or windows 98
    EVERLAST 250 EX , EVERLAST I-MIG 205 , EVERLAST spool gun NOW have 2 EVERLAST POWER PLASMA 50 plasma cutter's , LINCOLN 175HD MIG WELDER , VICTOR TORCH SET and many more tools to many to list

Similar Threads

  1. Everlast Super200P died. Performed "diode-ectomy". Now it's welding again!
    By jakeru in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 18
    Last Post: 01-27-2015, 09:24 PM
  2. Northern Industrial 1644910 AD Helmet Opinions? (3.82" x 2.44" view area)
    By Welderooni in forum TIG Welding (GTAW/GTAW-P)
    Replies: 2
    Last Post: 01-10-2013, 03:49 PM
  3. Replies: 11
    Last Post: 10-30-2012, 06:43 PM
  4. Just Clicked the "Go" Button
    By Slartybartfa in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 34
    Last Post: 06-08-2012, 10:25 PM
  5. Cutting 3"x3"x3/16" Angle
    By NRM in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 7
    Last Post: 07-01-2011, 11:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •