PowerPlasma 50 problem - Spark but no HF arc

[Kapoor]

Thank you for calling/responding so quick. Got to be the best customer service I've ever seen. I believe he's in contact with the proper channels to get everything worked out. Also thanks about the info, and fixing my posting mistake.

@Mike, when my father was talking to you he mentioned his air dehumidifier, well here's a few pictures of it.

Thanks again

http://img.photobucket.com/albums/v7...1-27091947.jpg
http://img.photobucket.com/albums/v7...1-27092058.jpg
http://img.photobucket.com/albums/v7...1-27092142.jpg

[everlastsupport]

Thank you for calling/responding so quick. Got to be the best customer service I've ever seen. I believe he's in contact with the proper channels to get everything worked out. Also thanks about the info, and fixing my posting mistake.

@Mike, when my father was talking to you he mentioned his air dehumidifier, well here's a few pictures of it.

Thanks again

http://img.photobucket.com/albums/v7...1-27091947.jpg
http://img.photobucket.com/albums/v7...1-27092058.jpg
http://img.photobucket.com/albums/v7...1-27092142.jpg

No problem on the call. Would have called sooner had I see the post.

I will find gauge and the hose for mine. Thanks for the info. I will post the info her for others as well.

Tony mention an inline hose (see above pictures) and a gauge. The gauge turns from blue to white when it's time to replace the hose. The heat the gauge and reuse it and buy another hose.

$25 for the hose and it lasts for I think Tony said 6 month under commercial use. The gauge I think he said was $25 as well.

$50 or $75 to make sure you have good dry air going in the plasma cutter is worth it to me.