Newbie from the Northwest signing in!

[Rodsmachineshop]

like the welder but would toss the case and get something more sturdy with foam padding inside to protect welder or line the case with foam

[everlastsupport]

No plug on it yet. Son is not here and I am old. So no rush on my part.

Yea, the lack of foam, had scratches on the bezel, then I scratched it some more putting it in and out. Not that it affects welding.

Has post flow, amps, TIF/stick and HF/lift switch. Really simple and all I would need for thinner steel TIG. The size is the cool part, and I have a couple small tanks of argon so I will throw a 125 in the back of the truck this weekend maybe and go play. Have a diesel inline 6 to an impeller that needs some help. Was gonna MIG it. But might TIG it if the weather is right.

Front panel. Simple. Purge gas by hand, like I always do, it has post flow, perfect.
Has a shoulder strap, but I might opt to just carry it and the leads over the case.
But with the case you can drop in the flow meter, filler, electrodes, tungsten, wrench/screw driver, etc.. OK, keep the case.


The TIG-160STH On top of the IMIG 205 and it's above a 250EX
This thing is small like the 200 and the PA200.


These two belong together. What a couple.
Actually, to give an idea of the size.