Results 1 to 7 of 7

Thread: Project #2 from Tacoma747: Category: Off-road, custom Rock Sliders (step bars)

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Project #2 from Tacoma747: Category: Off-road, custom Rock Sliders (step bars)

    Started building some rocksliders for a friend/customer today for his 88' Toyota 4runner, figured they would be a great project to post pictures of.

    They are pretty easy to make, more time consuming than anything with notching tubes, and bending the outer tube. I am not going to post any exact measurements, because if someone decides to make some, they are going to be a 'custom' size anyways. The straight tube on these is 62" long. The tubing is 1.75" .120 DOM.

    Here you can see that where I welded the legs that attach to the frame on the tubes, it actually bowed the tubes pretty far. Not enough to notice unless you put it next to a straightedge though.

    I'll have some more pictures tomorrow after I get them welded on to the 4runner.
    Last edited by Tacoma747; 04-14-2012 at 02:49 AM.

    '96 Tacoma V6 on 37's, full custom, built for racin!
    Yamaha Rhino w/ 800 Rotax built for racin!
    Miller 251 MIG
    Everlast Powerplasma 60C with CNC plasma table

    Looking for sponsors for KOH 2013 race!
    Racin' Tacoma Build Thread

Similar Threads

  1. Replies: 10
    Last Post: 02-19-2013, 01:26 PM
  2. Replies: 28
    Last Post: 12-10-2012, 12:21 AM
  3. Replies: 10
    Last Post: 07-19-2012, 01:34 AM
  4. Replies: 2
    Last Post: 06-15-2012, 01:40 AM
  5. Project 1 from Hooda. Category: 3) Custom Automotive on/off road Welding.
    By hooda in forum Personal Projects (no welder required)
    Replies: 8
    Last Post: 04-03-2012, 04:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts