Share
Results 1 to 20 of 33

Thread: Will the PowerPlasma 60C cause hi-frequency interference on a CNC table?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 04-08-2012, 02:59 AM #9
    zoama's Avatar
    zoama
    zoama is offline Super Moderator
    Join Date
    Jul 2011
    Location
    SC
    Posts
    2,347

    Default

    and two more... http://www.youtube.com/watch?v=Otdkuluv334 http://www.youtube.com/watch?v=kR8qonq68VA
    Last edited by zoama; 04-08-2012 at 03:02 AM.
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Pro 256 no HF (high frequency) start
    By jch13 in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 1
    Last Post: 07-01-2015, 11:24 PM
  2. 60c interference problems
    By pontbil in forum Everlast Plasma Cutters (PAC)
    Replies: 3
    Last Post: 05-31-2014, 03:02 AM
  3. Pulse VS AC Frequency control. Which does What??
    By hooda in forum TIG Welding (GTAW/GTAW-P)
    Replies: 17
    Last Post: 01-23-2013, 04:42 AM
  4. Video of our Powerplasma 70 and CNC Table
    By jfley in forum Everlast Plasma Cutters (PAC)
    Replies: 1
    Last Post: 02-27-2010, 06:09 PM
  5. Tracking down the cause of plasma cutter interference
    By Loki in forum Everlast Plasma Cutters (PAC)
    Replies: 5
    Last Post: 10-28-2009, 01:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules