Any idea when this is going to be added to the US site?
Any idea when this is going to be added to the US site?
Everlast PowerTig 200DX (Ordered-Waiting to arrive!)
Everlast Supercut 50P
Fortune Favors the bold.
Oleg Gladshteyn
Phone: 650 588 8082 / 877 755 WELD
Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
Email: oleg@everlastwelders.com
Website www.everlastgenerators.com
www.linkedin.com/pub/oleg-gladshteyn/48/b08/875
Mark
performance@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x204
M-F 9am - 5pm EST
So there has not been too much feed back on the 210 EXT. How has the machine been working for thes with the machine?
Miller 252
PowerTig 250 EXT
Evolution Rage 2
48X6 inch Belt Sander w/ 9 inch Disk Sander
...
Mike R.
Email: admineverlast@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x203
M-F 12 - 7PM PST
FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.
Jody has run one for quite a while now, before they were available. He has put up some new videos about it and its performance capability.
Mark
performance@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x204
M-F 9am - 5pm EST