Quote Originally Posted by performance View Post
Again, it depends on your program version, and your hidden menu settings for 2T. It is possible on some, not on others. All moot points if you are using the foot pedal.

There are not any default settings for the machine. It will always default to the last program used. Repeat: NO default settings.

I think you'll have an easier time learning the 210ext and its capabilities if you forget what you know about the V205T and not try to translate its features into the 210ext. There are similarities, but there are also many differences. There will be some things the 210ext won't do that the V205 can, and somethings it can do that the V205T can't.
How do you determine the program version? When my machine boots it shows all this data.

075. 514 (for 500mS)
070 907 (for 500mS)
07A 01.2 (for 1S)

What is the hidden menu setting for that version? The only thing I can find is.

D08= Torch trigger or amp control 4T function by type torch (00 = 4T 01 = 4T Normal)

Not sure what that means or if it effects 2T operation.

Is there a list of program versions and what changes are made? Can I upgrade my firmware?

Here is my current list of hidden menu settings? Are there defaults for those settings?

D01= N/A {00.5)
D02= HF Arc start duration (.5-5 seconds) {2.0}
D03= HF Arc start frequency (10-100Hz) {50}
D04= HF Arc start amps DC (10-100 amps) {30}
D05= HF Arc start amps AC (15-100 amps) {40}
D06= N/A {1.5}
D07= Lift start current DC and AC (10-100 amps) {15}
D08= Torch trigger or amp control 4T function by type torch (00 = 4T 01 = 4T Normal) {00}
D09= Voltage Reduction Device for MMA/stick (00 = VRD off 01 = VRD on) {00}
D10= Pulse mode Standard or Advanced. AC is added to DC in Advanced mode (00 = Standard 01 = Advanced) {01}