Thanks guys...went with the 200DX and a PP50 and they should be here in the next two days!
Everlast PowerTig 200DX
Everlast PowerPlasma 50
Old 90 amp flux core wire feed
HF 90/160 Amp TIG/Stick
Mini Lathe, Mini Mill, Manual Bender, Ring Roller
HF 2HP 29 Gallon Belt Drive Compressor
8" plate shear, homemade 3-4 ton bench punch
Homemade H-frame press, aluminum casting furnace
HF 12 speed 3/4hp Drill Press, Clarke 4x6 bandsaw
Chop saw, 10" disc sander, 10" Mitre saw modified for aluminum
Makita for the power tools that matter, HF for the ones that dont (or are too expensive)