Senior Member
When posting projects with pictures, is there an unspoken picture count per post? I am used to forums where they prefer that you break up lots of pictures over a few posts rather than one jumbo sized post. I would think with the thumbnail system in use here, that would not be a problem, but I figured I should ask.
Long arc, short arc, heliarc and in-the-dark!
Super Moderator
Doesn't matter, a browser is going to load the whole page anyway. Thumbnails keep the pages loading fast.Originally Posted by Rambozo
Links to my welding projects > : Spray Arc with the 250p : Coldsaw Stand : Welding Cart : Heavy Duty Rolling Shelf : Taller Bandsaw
2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw
Everlast Sales and Support Team
No, we'd rather you post 5 per post if possible. That keeps from "inflating" post counts. We have to sometimes edit "down" a persons posts count because of "spamming"...writing a one or two sentence post with guys saying : cool post, nice job etc....The one post per picture is akin to the same thing. We want "meaty" posts, that someone can post from. Why make 2 posts when one good one can do?
Mark
performance@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x204
M-F 9am - 5pm EST
Member
I have a log splitter I modified with a drop hitch so it would tow behind my 4wheeler. Off road only. I'm not sure the category it would fit within for the contest. Any ideas? thank you.
ken
UNT 520D plasma/stick/tig; Hobart Handler 140 Mig; HF 80amp stick welder; Victor O/A; 4x6 Horizontal bandsaw; Planishing hammer; & Stuff
Senior Member
Sounds like it would fit here... 3) Custom Automotive on/off road Welding: i.e. exhaust systems, frames, buggies etc.
Off road and custom.
Shade tree MIG welder.
Now a Shade tree TIG welder.
Member
that's what I was thinking too, but hoped for moderator ok, so no screw-up.
ken
UNT 520D plasma/stick/tig; Hobart Handler 140 Mig; HF 80amp stick welder; Victor O/A; 4x6 Horizontal bandsaw; Planishing hammer; & Stuff
Member
I would call a log splitter a tool???
http://www.facebook.com/CBRMetalworks
'96 Tacoma V6 on 37's, full custom, built for racin!
Yamaha Rhino w/ 800 Rotax built for racin!
Miller 251 MIG
Everlast Powerplasma 60C with CNC plasma table
Looking for sponsors for KOH 2013 race!
Racin' Tacoma Build Thread
Posting Permissions
Reply With Quote