Много фотографий пожалуйста.
Много фотографий пожалуйста.
Links to my welding projects > : Spray Arc with the 250p : Coldsaw Stand : Welding Cart : Heavy Duty Rolling Shelf : Taller Bandsaw
2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw
This is weird. When I first commented there were no pictures, but I see them now and no edit on the post. Something is up with my other computer.
Anyway. You can make the repair. But if they are friends (free or cheap). Either pass on it, or make them help with the repair. It will be some work, Jake outlined what you need to do. Note what he said on the black is bad.
Mike R.
Email: admineverlast@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x203
M-F 12 - 7PM PST
FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.
I'm not going to lie, if it were mine I would try it! Not sure I would want to do it for someone else $$$. I could see a project like that costing me more money than I would make if I were charging. On the flip side it would be nice to know whether or not you could pull off that type of repair.
Lincoln Eagle Engine Drive
Everlast MTS 250
Everlast Power Tig 225lx
HTP Mig 2400
Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
Miller Spectrum 375 Extreme Plasma cutter
Victor cutting torch
HF 20 Ton Shop Press
HF 4x6 Band Saw
HF Air Compressor
Northern Tool Drill Press
www.murphywelding.com
Amazing work (again!) The original destruction was difficult to look at. Looked like it could not be repaired. Fine repair job and I love the look of the bike. Would have been a real shame to throw away the bike after the crash so you have done a very good favor for your friend. Cheers!
Is it OK to want to break something just so that you can weld it back together?
Everlast PowerTIG 185 Micro IGBT AC/DC Welder