As a faceter and gem cutter I can say "close" but not quite. Those "sunken" facets would be impossible to cut but still it is pretty impressive art.
http://www.gemcutters.org
Thurmond
Member
As a faceter and gem cutter I can say "close" but not quite. Those "sunken" facets would be impossible to cut but still it is pretty impressive art.
http://www.gemcutters.org
Thurmond
Miller Bobcat 3 Phase,
Miller Suitcase X-Treme 12VS wire feeder for the Bobcat with M-25 300A .045" gun / Bernard 400A 5/64" wire mig gun .
26 series gas cooled TIG torch, setup for quick connect to Bobcat.
17 series gas cooled Tig Torch for Low Amp Solar Tig (Direct Solar Panel Powered Tig welding)
Hobart Handler 187 Mig / Fluxcore
EVERLAST PowerUltra 205P
EVERLAST PowerTig 250 EXT 2013 Model
Posting Permissions
Reply With Quote