The good thing about my THC is that can work with any plasma cutter and it's designed to read full arc voltage. I have it wired to pins 5 and 7 on the pp60c cnc port plug. If that will not work I can change those wires to the ground clamp and the +on the torch plug. The guy at Eagle Plasma told me to check the voltage with the plasma cutter running. The good thing about my THC is that you can find youtube video's with import plasma cutters running THC.

I am not using the Arc OK or OK to move pins 9 & 10 on the plasma cutter. From what I have read the OK to move has been an area of trouble for people who are using import cutters or any other non thermal arc or hypertherm plasma cutter. I'm using pins 1 & 2 for on/off and pins 5 & 7 that should read full voltage. I really hope it works well because it's a simple THC. I also like that I can change the torch height while cutting. It will require some note taking to learn the correct cut height and voltage settings.

Here is the youtube link for Proma Elektronica It's really a novel idea to build something that will work with any brand plasma cutter!