Originally Posted by
Rodsmachineshop
I have seen a few cnc tables were there just pop riveted at the ends with aluminum rivets and a thin bead of glue underneath since all the pressure is pushing down on rack could use jb weld but never would be able to remove the rack if needed
I think you have nailed the issue,,,when you think about it ,,the stresses are forcing the rails from end to end ,,, a rivet at each end should take the strain and doublesided tapes function is just to hold the rack in position....I can see this more clearly now...thanks
Some of those lies people tell about me, are true
Reply With Quote