We've had a few questions on TIG starting gas settings and how to translate the flow from "cubic feet per hour" and "liters per minute". Hope this helps.
We've had a few questions on TIG starting gas settings and how to translate the flow from "cubic feet per hour" and "liters per minute". Hope this helps.
Mike R.
Email: admineverlast@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x203
M-F 12 - 7PM PST
FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.