CNC Plasma Table?

[SeanMurphy265]

What's the most economical way to get a plasma table? DIY kit or ready to go. I'm wanting a 4x4 to start out with. There's a lot out there about Torchmate, but that's out of my price range.

[geezer]

Sean, you could start off looking here to get an idea of kit costs etc..http://www.motiontek.ca/cncplasmakit.html

Here is another source for parts: http://www.lowcostcncretrofits.com/index.html

[zoama]

This one looks promising > http://www.ebay.com/itm/NEW-4-x-4-CN...item3a70490efc

[SeanMurphy265]

This one looks promising > http://www.ebay.com/itm/NEW-4-x-4-CN...item3a70490efc

I looked at that one, just could not find any reviews.

[zoama]

I looked at that one, just could not find any reviews.

Go ahead and buy it, if you like it I'll buy one too.

[hooda]

Go ahead and buy it, if you like it I'll buy one too.

Anyone looking to get into the CNC plasma table world, please contact me. I'll have something major to announce in a few weeks. The table suggested above will have you hating life when you recieve it and figure out what you DON'T get!! Read the fine print in the listing (hint: the word "demo" comes to mind).

[zoama]

Anyone looking to get into the CNC plasma table world, please contact me. I'll have something major to announce in a few weeks. The table suggested above will have you hating life when you recieve it and figure out what you DON'T get!! Read the fine print in the listing (hint: the word "demo" comes to mind).

So it comes with everything but software or is something else missing ?

[SeanMurphy265]

For the price, I'm tempted to try this one!
http://www.ebay.com/itm/CNC-Plasma-C...ht_1286wt_1185

[Oleg]

http://www.ebay.com/itm/NEW-4-x-4-CN...item3a70491e32

Look at the pictures.. they using EVERLAST power supply.... nice

[charger891]

Very nice and the price is pretty decent! so when`s everlast going to come up with one??

[SeanMurphy265]

This company makes DIY Gantry kits.
http://www.needfulthings.net/host/no...udio/index.php

[Oleg]

Very nice and the price is pretty decent! so when`s everlast going to come up with one??

charger891

will see how all will go , but we may offer 4x4 next year. its a LONG process

[charger891]

I got time to wait!

[outsidegangskilled]

I bought both my tables on eBay and paid half price then new but both machines had little wear. One was from a person who never figured out how to use it and even the grates, both sides were new. I bought the largest one from a company who bought it just to cut som
Rone parts they needed and then sold it. Just be patient there is always someone who buys one and thinks its easy and when they find out it isn't as easy as the brochure makes it to be, will want to dump it.
Just remember, you will need a computer for it, a large compressor, a air dryer etc.
Good luck