Isn't the 185 supposed to go dual voltage soon?
Member
Isn't the 185 supposed to go dual voltage soon?
Everlast PowerTig 200DX
Snapon FM140 Mig
Purox Oxy/Acet Torch
Coleman 80 gal. Compressor
7x10 Mini Lathe
Craftsman 12" Bandsaw
Lots of litler stuff
Member
Dual voltage??
Yes, In fact, there were some of the new duak voltage units inbound when this unit shipped, but I didn't have the time to wait. I don't know if that will be standard or an option, but by now they SHOULD be in stock, call to check.Originally Posted by Buzz
"It's not magic it's experimental, kind of like washing your hands after pooping used to be." -House
Everlast PowerTig 250EX-arrived 1-26-2012
Everlast PowerCool W300-arrived 1-26-2012
Everlast PowerTig 185 Micro-arrived 1-26-2012
Everlast PowerPlasma 70-arrived 1-26-2012
ESAB MigMaster 250-borrowed
HyperTherm 151 AKA "The Light Sabre"
Linde UCC-305-964 lb. of old time water cooled TIG love-SOLD-Bad MOJO
Purox OXY/ACETYLENE
Member
PP70 Trouble plus 185 Micro first shots
This is a heads up, I'm moving these to Individual threads to better document the actual use of each machine. Look under TIG and Plasma Cutting Threads, Respectively, Thanks for all the great feedback So far!!! Chris Hooda.
"It's not magic it's experimental, kind of like washing your hands after pooping used to be." -House
Everlast PowerTig 250EX-arrived 1-26-2012
Everlast PowerCool W300-arrived 1-26-2012
Everlast PowerTig 185 Micro-arrived 1-26-2012
Everlast PowerPlasma 70-arrived 1-26-2012
ESAB MigMaster 250-borrowed
HyperTherm 151 AKA "The Light Sabre"
Linde UCC-305-964 lb. of old time water cooled TIG love-SOLD-Bad MOJO
Purox OXY/ACETYLENE
Posting Permissions
Reply With Quote