Results 1 to 20 of 147

Thread: Some pictures from Factory

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. Default

    It has been quite some time since I have sent pictures back from my visits. The reason is that with our growth over the last couple of years what was once 4 or 5 trips a year has now become a bi monthly occurrence I returned from Shanghai on Saturday night and I leave again on the 3 Rd ,a day short of two weeks and I am booking my next trip for the end of as you can see we keep very busy.
    You hear a lot about Duty cycle and how it pertains to welding and just what steps are taken to actually have accurate readings for this.
    First you need to have a ambient temperature set as a example Canada has recently increased the temperature required to 47 degrees from 40 c for the rest of the world.
    Below are the temperature controlled " ovens used in determining the duty cycle rating. This has to be done this way for accuracy . Imagine sitting a unit on a freezing concrete floor in the middle of winter and wondering why the readings are different from when you did this in summer in 90' weather.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	image.jpg 
Views:	397 
Size:	146.3 KB 
ID:	13039   Click image for larger version. 

Name:	image.jpg 
Views:	385 
Size:	135.8 KB 
ID:	13040   Click image for larger version. 

Name:	image.jpg 
Views:	381 
Size:	142.1 KB 
ID:	13041  

    905 637 1637

Similar Threads

  1. MORE Pictures and information from the Factory.
    By performance in forum Everlast Announcements, Contests and Promotions
    Replies: 21
    Last Post: 05-26-2014, 01:46 PM
  2. Consumable factory
    By Titan winch in forum Everlast Plasma Cutters (PAC)
    Replies: 4
    Last Post: 11-02-2013, 12:30 PM
  3. Problem with uploading pictures?
    By EmptyNester in forum Forum related Questions
    Replies: 3
    Last Post: 10-28-2012, 09:02 PM
  4. pictures of setting hf gap on supercut 50
    By zinger in forum Everlast Plasma Cutters (PAC)
    Replies: 0
    Last Post: 02-01-2012, 09:45 PM
  5. pictures of the car I am building
    By Wrenchtamer in forum Other Custom Fabrications
    Replies: 5
    Last Post: 06-06-2011, 10:16 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts