CK Torch Packages For Everlast Welders

[zoama]

The remote amp control sounds great, that's torch mount, right?

Yes..

[Jake98]

That's very cool, thanks for the video! I have to get one of those.. the last one he showed looked like it can't be beat.

[jerky]

How much? I just ordered the ck gas saver lense off ebay for 50

[Mike J]

How do we get pricing, email them?

They are not that far from me (driving distance) will see if I can drop in sometime and try out the different torches.

Cheers,

Mike

[zoama]

You could email CK... I just looked up the part numbers that I wanted at www.ckworldwide.com then search for them at Edit: I can't recommend arc-zone anymore due to very poor customer service. I buy local now at a much lower price with no BS. The only CK frontend parts I buy are the wedge collets (the rest is over priced in my opinion) for the other parts (cups/gas lens) I buy generic.

[performance]

Guys keep in mind, that the I tig 200 and PowerTig 185 use different pots. Also the 200DX is different.

The standard 47k should fit the 225lx and 250ex and the ext.

[HellaFab]

Going to bump this old thread...

I was given this part number from my lws for a dinse connector as found in this thread:

#SL2-35QD (1/2” Dinse w 12” gas hose quick disconnect for CK9, CK17)



Would this work with a 2013 Powertig 200DX-D?

[performance]

Just a 200 dx guys. Not sure why canada put that on their site. We didn't assign it a D designation. Its simply a 2013 model 200DX.

It should work.