IMIG 200: finally did the deal

[DaveO]

After a long, self-inflicted wait I ordered an IMIG 200 yesterday, due to arrive next week. Whoo hoo! I ordered some wire today, and forgot to get extra contact tips.

Alex at Everlast said the machine ships with a bare power cable: no plug. What plug is recommended, or are others using? I saw a post that suggested a NEMA 6-30.

Thanks~

[zoama]

I'd use a 6-50 on all 240v welders.

[NRM]

I second the NEMA 6-50.