Results 1 to 5 of 5

Thread: 205 issues

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. Default 205 issues

    Power Ultra 205

    It is possibly operator failure, but I cannot strike an arc with the arc attachment. The plasma seems to work fine. I have not tried the tig because I don't have an argon tank yet.

    I had plasma/tig switch set to tig, tried switching from local to remote. I took both ends of arc cord apart to make sure connections were tight. Ground cord must be ok because plasma worked.
    Last edited by roadymi; 09-20-2009 at 08:03 PM. Reason: add info

Similar Threads

  1. 225 lx issues
    By SeanMurphy265 in forum TIG Welding (GTAW/GTAW-P)
    Replies: 14
    Last Post: 04-28-2016, 01:50 AM
  2. Am I having gas issues?
    By Rodzilla in forum TIG Welding (GTAW/GTAW-P)
    Replies: 8
    Last Post: 12-04-2015, 04:19 PM
  3. 250 EX issues
    By Skeeter in forum TIG Welding (GTAW/GTAW-P)
    Replies: 16
    Last Post: 07-21-2015, 02:50 AM
  4. On/off switch issues
    By broberts5 in forum TIG Welding (GTAW/GTAW-P)
    Replies: 1
    Last Post: 08-16-2013, 10:53 PM
  5. PP50 arc issues
    By millermatic in forum Everlast Plasma Cutters (PAC)
    Replies: 7
    Last Post: 09-29-2012, 10:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts