Share
Page 3 of 3 FirstFirst 123
Results 41 to 48 of 48

Thread: ARGON and ARGON/CO2 TANK SIZES

  1. #41
    Join Date
    Mar 2011
    Location
    The Boonies of Texas
    Posts
    420

    Default

    Quote Originally Posted by trickbiker View Post
    When I went to gas on my mig this year I decided to get a bigger tank and was informed I couldn't because the bigger one were for commercial people. What!! Am I missing something here.
    I deal with Airgas and as long as you have the money they will set you up with whatever size you want. Your situation is strange for sure.

    Thurmond
    Miller Bobcat 3 Phase,
    Miller Suitcase X-Treme 12VS wire feeder for the Bobcat with M-25 300A .045" gun / Bernard 400A 5/64" wire mig gun .
    26 series gas cooled TIG torch, setup for quick connect to Bobcat.
    17 series gas cooled Tig Torch for Low Amp Solar Tig (Direct Solar Panel Powered Tig welding)
    Hobart Handler 187 Mig / Fluxcore
    EVERLAST PowerUltra 205P
    EVERLAST PowerTig 250 EXT 2013 Model

  2. #42

    Default

    I talked to Airgas in gainesville and the biggest tank they will sell is 125 if you want a larger tank you have to rent. I don't have a account with them and that my make a differance.

  3. #43

    Default

    That is true. Anything over 125 must rent or lease. I lease 4 tanks from them. Better off that way in many respects.
    But the bit about "commercial" people doesn't hold water. If you submit a credit app, they will be glad to set you up in most cases. If not keep looking. In any small town there are several welding stores close by.

  4. #44
    Join Date
    Mar 2011
    Location
    Eastern Oregon
    Posts
    681

    Default

    Quote Originally Posted by Steve View Post
    Here is a link to a US military site for the markings on pressure vessels.....http://www.usamma.army.mil/assets/do...20Markings.pdf
    The document is titled "Oxygen Cylinder Markings" is that info good for all other bottles as well?
    Penncrest Buzzbox - Infinite amp control! Man the 70's were good.
    Everlast Powerplasma 60 - Reliable unit, cuts well.
    Everlast i-MIG 250P w/spoolgun - Really smooth, plenty of cajones.
    Everlast 250EXT - Sometimes it just takes a kick in the balls...
    Everlast 255EXT - Just started playing

  5. #45
    Join Date
    Mar 2011
    Location
    The Boonies of Texas
    Posts
    420

    Default

    Quote Originally Posted by 67cudafb View Post
    I talked to Airgas in gainesville and the biggest tank they will sell is 125 if you want a larger tank you have to rent. I don't have a account with them and that my make a differance.
    True, I lease (rent is by the month, lease is by the year) most of the bottles that I use less so I don't have to be worried about having hydro testing done on my bottles when they are due. My local welding shop sells and trades out bottles so you usually never have the same bottle back anyway whether rented or user owned.
    Miller Bobcat 3 Phase,
    Miller Suitcase X-Treme 12VS wire feeder for the Bobcat with M-25 300A .045" gun / Bernard 400A 5/64" wire mig gun .
    26 series gas cooled TIG torch, setup for quick connect to Bobcat.
    17 series gas cooled Tig Torch for Low Amp Solar Tig (Direct Solar Panel Powered Tig welding)
    Hobart Handler 187 Mig / Fluxcore
    EVERLAST PowerUltra 205P
    EVERLAST PowerTig 250 EXT 2013 Model

  6. #46
    Join Date
    Oct 2011
    Location
    Litchfield Park, AZ
    Posts
    370

    Default

    Quote Originally Posted by trickbiker View Post
    When I went to gas on my mig this year I decided to get a bigger tank and was informed I couldn't because the bigger one were for commercial people. What!! Am I missing something here.
    I would just ask for the manager if someone said that. That is crazy in this market to turn down a sale.
    Miller 252
    PowerTig 250 EXT
    Evolution Rage 2
    48X6 inch Belt Sander w/ 9 inch Disk Sander
    ...

  7. #47

    Default

    I've read all the posts with interest both before I bought a tank and after.

    I guess I'm convinced that its all a racket and its tough on somebody that isn't a large account.

    I recently bought a 125 cu ft from a local welding supply store. After research on the web I found that there price was comporable to the lowest price I could find on the web. So I got a brand new tank. (he made a big deal about it being new) it had their name on the neck. When I mentioned the name on the neck I was told it didn't matter, it was still mine. So I said "okay, when I bring in my brand new tank, you'll refill it, right?" He said "no, we swap them."

    I felt like i had just played a shell game. In the end I realized that I just need to keep the receipt.
    Just starting in Aug '10
    ---
    Hobart Handler 187
    Power Plasma 50

  8. #48
    Join Date
    Mar 2011
    Location
    The Boonies of Texas
    Posts
    420

    Default

    A welding shop in the closest "big city" to me 80 miles away will fill your bottle and return the same one rather than swap it out, but it can take some time depending on how busy they are when you drop it off.

    Thurmond
    Miller Bobcat 3 Phase,
    Miller Suitcase X-Treme 12VS wire feeder for the Bobcat with M-25 300A .045" gun / Bernard 400A 5/64" wire mig gun .
    26 series gas cooled TIG torch, setup for quick connect to Bobcat.
    17 series gas cooled Tig Torch for Low Amp Solar Tig (Direct Solar Panel Powered Tig welding)
    Hobart Handler 187 Mig / Fluxcore
    EVERLAST PowerUltra 205P
    EVERLAST PowerTig 250 EXT 2013 Model

Similar Threads

  1. Argon Tank price?
    By Elantramax1 in forum General Welder Questions
    Replies: 38
    Last Post: 02-05-2015, 11:18 PM
  2. Argon Tank Empty?
    By Buggy Chief in forum TIG Welding (GTAW/GTAW-P)
    Replies: 3
    Last Post: 01-11-2014, 07:14 PM
  3. Just upgraded to a 250 CFT argon tank.
    By Steve in forum TIG Welding (GTAW/GTAW-P)
    Replies: 33
    Last Post: 11-17-2013, 12:23 PM
  4. Why 100% Argon or Argon/CO2 75/25%
    By mdennis in forum General Welding Questions
    Replies: 6
    Last Post: 08-09-2013, 04:11 AM
  5. Ballpark idea of argon tank time...
    By Ray C in forum General Welder Questions
    Replies: 3
    Last Post: 08-08-2012, 10:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •