Mystery Welder Revealed: 2012 DIGITAL POWERTIG 210EXT TIG/STICK welder

[Titan winch]

hey guys, Im up here in canada and its currently -32c just thought I would mention that haha. Anyways I've been on the canadian site and theres not much going on, I only found out about this 210 by cruzing this forum. Just wondering if anyone knows about the availability of the 210 up here in canada. thanks!

There is a very good reason why there is no mention of availability or time frames on the Canadian Site

I visited the Factory just before Christmas for more samples/ comparison. We have have changed the design for the face in order to improve air flow and increase the Duty Cycle by another 5%. with further testing and evaluation over the next few weeks will determine if i will be back there in February . If i feel it is needed at that time then i will spend the required time there. But for me to list this information on my site or to pick possible time frames for production when in fact it is really only a ball park time frame is not something i am prepared to do.
So this is What Canada does

[rsnider]

I didn't think my simple question warranted starting a new thread. Plus, I'm really interested in purchasing one of these, so I figured I would just ask my question here; Does Everlast supply any AirGas stores in or near Tulsa, Oklahoma? (North East Oklahoma) Or any welding supply stores in the area for that matter?

I'm on the fence about ordering from California for warranty shipping reasons. If I can pick one up from a local dealer, I'm sold. That would be the first thing on my list come Monday.

[SeanMurphy265]

Any news on the PowerTig 210EXT?

[Oleg]

Any news on the PowerTig 210EXT?

Finial stages ... just want to make sure 300% tested.. so we dont get 250EXT issue

[SeanMurphy265]

Finial stages ... just want to make sure 300% tested.. so we dont get 250EXT issue

I understand!

[Winky]

Eagerly awaiting results … really want to see this one.

[Rodsmachineshop]

dose it come with a built in stereo and plasma tv

[225]

Any news on the new welder?

[Winky]

Beautiful ... very sleek and clean.

[X83]

Do you have the PowerTig 210-EXT owner's manuals available for download in a pdf yet?

I would like to see the specifications and different type AC wave forms this machine uses to compare it with other welders.

[Oleg]

Do you have the PowerTig 210-EXT owner's manuals available for download in a pdf yet?

I would like to see the specifications and different type AC wave forms this machine uses to compare it with other welders.

X83

manual will be uploaded with in 1-2 days
its done

[performance]

Wave forms are Advanced Square, Soft Square, and Sine wave.

[Rodsmachineshop]

dose it come with a cd player lol and HBO lol

[Oleg]

part 2 is out

[Rodsmachineshop]

I like the flip down cover on the front help protect touch pad , tinted would be nice for the flip down cover and like how the control's are laid out

[Tacoma747]

Ughhh this might cost me some money...

[performance]

This isn't the final unit that He is testing, thought the basic layout of the screen is. You can see where he has made a small "marker" correction, which has been corrected in the production units. They made a change in production at some point and forgot to give us a heads up when we went to production on this unit...A reason why we are checking things thoroughly through. The Plastic panel isn't the final one which we have either...it should look very close to the model we displayed in the thread about the welder.

[Rambozo]

Is the numeric display really that much different than the others? Or is that some artifact of the video camera?

[performance]

There may be some slight difference,but not as much as is shown here. The camera is picking up the cycling of the lights somehow.

[Injected65]

I definitely think I could live with owning one of these welders. Anybody want a used 200DX?