CK 130 Torch W/25' Superflex Lead on my PP256

[zoama]

No torch switch tho, huh? I want to get something like that with a switch.

Just about any switch will work or you can use the pedal as a switch

[Jake98]

The black 18" gas hose came off a different torch?

[zoama]

The black 18" gas hose came off a different torch?

The black hose was 6 feet long and comes with the dinse connector. I cut it back to 18 inches and pushed the brass male quick coupling into it (from my oem 26 that I'll never use) and added a piece of heatshrink.
I have parts for a super low profile swith of my own design, coming from china this week.

[zoama]

Update... it's gonna be 1 or 2 more weeks on my switch parts. They just shipped today.

[Joe from NY]

Will this torch work on the 200DX?

[zoama]

Will this torch work on the 200DX?

I missed your post somehow but yes the same setup will work on the 200dx.

[Jake98]

That's a nice setup, bet it feels good to use.

[Jake98]

Update... it's gonna be 1 or 2 more weeks on my switch parts. They just shipped today.

You could make one in two weeks. (not to rub it in..)
I keep going back and forth on the 1 hose or 2 hose thing, one would have to be a lot nicer I'm thinking. Haven't had much time to use it tho, so I don't exactly need to rush the decision..

[zoama]

You could make one in two weeks. (not to rub it in..)
I keep going back and forth on the 1 hose or 2 hose thing, one would have to be a lot nicer I'm thinking. Haven't had much time to use it tho, so I don't exactly need to rush the decision..

"1 hose or 2 hose thing" ?

[Jake98]

Yeah, you got the 1 hose with the adapter, the one that came with my unit has two all the way to the torch, gas and power. I would think 1 must be slightly easier to maneuver. Arc-Zone is closed for a few days anyway.

[ChadP]

Does the torch come with the red cable cover

[zoama]

Does the torch come with the red cable cover

Yes, red is the standard lead color now.

[NRM]

Zoama do you know the ID of the gas hose you trimmed down? I think I found the male plug I need but have to get the right barb end 4mm, 6mm or 9mm. I am thinking it should be the 6mm but wanted to check to see if you knew.

[zoama]

Zoama do you know the ID of the gas hose you trimmed down? I think I found the male plug I need but have to get the right barb end 4mm, 6mm or 9mm. I am thinking it should be the 6mm but wanted to check to see if you knew.

6mm will work but 5mm is the correct size for 3/16 hose... you'll need to put a little soapy water on the barb to push it in.
When ordering a CK safe-loc dinse add LG to end of the part number for plug and play with everlast.
Eample: CK-SL2-35-LG is the 150amp large dinse with an 18" gas hose and male QC for everlast machines. Tell your vendor to order it from CK, they definitely have it.