Ancillary items are 6 months. When did you buy them?
Ancillary items are 6 months. When did you buy them?
Mark
performance@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x204
M-F 9am - 5pm EST
My pressure gauge failed and started leaking the second time I opened the bottle valve. I just put another gauge on and kept working... I never considered the gauge had a warranty.
Links to my welding projects > : Spray Arc with the 250p : Coldsaw Stand : Welding Cart : Heavy Duty Rolling Shelf : Taller Bandsaw
2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw
If a gauge breaks on a weekday that's a better thing if you only have one gauge, you can run out for a low cost gauge, they work fine. Happened to me once, and in my case, just like Zoama585, just swapped with another gauge. Since you have two unit you can interchange yours for now and contact sales for warranty info.
When you figure a low cost Clarke price for $20-40, sometimes it's a good backup option. Then swap ours out so you have a spare. Never hurts to have a backup.
It's to bad, but gauges today seem to be becoming disposable like everything else.
Mike R.
Email: admineverlast@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x203
M-F 12 - 7PM PST
FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.
i swapped over to the other gauge but it was also leaking(first time out of the box) but i messed with it some and got it to stop. the gauge i was using is 2 years old so i guess i'll do like you suggest and go buy another as a backup
everlast i-mig 200
96 gmc extended cab truck 350 rwhp daily driven for 289,000 miles
88 jeep cherokee custom built by me for me for well everything.someday it'll be finished
4.6L stroker,dana 44 front, 14 bolt rear, 35"xterrains,soon to come 231/205 doubler
Gages are pretty cheap on eBay.
http://www.ebay.com/sch/i.html?_nkw=...All-Categories