Share
Results 1 to 6 of 6

Thread: New Cooler Plumbing

  1. #1

    Default New Cooler Plumbing

    Any get the cart cooler and 250EX been able to hook up the water return line with the unit on the cart? My return line seems to be about 8 inches short to make the connection. Also, the chain on the bottom of the cart will not reach around a 300 cu ft tank. The top chain has plent of extra, the bottom is one link short.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	100_5173.jpg 
Views:	677 
Size:	145.4 KB 
ID:	3876   Click image for larger version. 

Name:	100_5170.jpg 
Views:	742 
Size:	140.0 KB 
ID:	3875   Click image for larger version. 

Name:	100_5172.jpg 
Views:	686 
Size:	133.3 KB 
ID:	3874  
    Lincoln Weld-Pak 100 (C-25 or CO2 Shield)
    Victor Oxy-Act
    Lincoln AC225 Tombstone
    Everlast 250EX & W300 Cooler

  2. #2

    Default

    In another thread someone suggested just cutting the sleeve from the torch cables to give the hoses more "scope" to reach the ports. I don't really like that idea; I assume that you could use barbed fittings to extend the hose. However, I was thinking that you might be able to use some of these "push to connect" fittings, like they sell in the plumbing section of the big box stores: http://www.watts.com/pages/_products...=71&parCat=138

    Assuming that hose is rigid enough for the fitting, the only concern would be whether the fitting (and the tubing extension) could take the heat from the torch water.

    Cheers
    Mike

  3. #3

    Default

    To me it looks like the top chain should be on the bottom and visa versa, is that possible

  4. #4

    Default

    Mike,
    It's the hose from the DINSE connector (hot water from torch) that is too short. The one coming from the jacket is the cold water supply to the torch and that is no problem. It looks like the specified length of the hose on the DINSE was about 8 inches too short for a good relax fit to the cooler.

    gezer,
    That is the first thing I thought. Both chains are the same length. All it would take to correct is to specify one chain being three links longer than the other. This would require the same amount of chain.
    Lincoln Weld-Pak 100 (C-25 or CO2 Shield)
    Victor Oxy-Act
    Lincoln AC225 Tombstone
    Everlast 250EX & W300 Cooler

  5. #5

    Default

    yep, same problem with my torch (standard wp18 torch)

    The optional 25 foot WP20 torch is ok tho, just enough length on the dinse hose with that one.


    Glen
    Everlast PP256
    Everlast Imig 200
    Everlast Power Ultra 205
    P&H 400 amp A.C.
    Miller 230 amp with Onan power

  6. #6
    Join Date
    Dec 2009
    Location
    Greater Seattle, WA
    Posts
    813

    Default

    Sounds like a good excuse to put that new welding machine to work to me!
    1. saw off a few chain links from the top chain, and
    2. weld sawed off links onto the end of the bottom chain
    '13 Everlast 255EXT
    '07 Everlast Super200P

Similar Threads

  1. Plumbing your shop for gas
    By RichardH in forum General Welding Questions
    Replies: 23
    Last Post: 12-27-2013, 11:01 PM
  2. Tig cooler cooler power source - "warning"
    By Odyknuck in forum TIG Welding (GTAW/GTAW-P)
    Replies: 1
    Last Post: 12-17-2012, 10:37 PM
  3. 256 plumbing
    By tnc110 in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 4
    Last Post: 01-29-2012, 08:40 PM
  4. more cooler
    By worntorn in forum TIG Welding (GTAW/GTAW-P)
    Replies: 11
    Last Post: 11-04-2011, 04:37 PM
  5. Water Cooled Torch Plumbing Iissue
    By performance in forum Technical Bulletins and Tips
    Replies: 0
    Last Post: 05-20-2010, 11:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •