Originally Posted by
redbeard
Another handy addition might be a simple strap between the legs for hanging the grinder and other things.
I will probably add a bar to hold the clamps. I need to fab up a holder for the MIG gun. I typicaly dangle the MIG gun over the edge with a clamp placed so it does not fall off the table. Too bad I am working 12 hr shifts now and do not have much time to play in the shop at this time.
Miller 252
PowerTig 250 EXT
Evolution Rage 2
48X6 inch Belt Sander w/ 9 inch Disk Sander
...
Reply With Quote