Share
Results 1 to 3 of 3

Thread: Foot Pedal extention cords?

  1. Default Foot Pedal extention cords?

    Is there a source listed for the Din connectors i really would like a 20 foot cable for my foot pedal. Or does everlast sell one?
    Power Ultra 250
    Wp- 17 Torch

  2. #2

    Default

    hI Socoj2
    There have be other post about the din connector here.
    I would check with tech support as it seems there are dirrerent size connector (early/late model welders) I have a PM256 (now PP256) I did fine the correct connector on Ebay ( 2 different auctions) but first ones were smaller and did not work. Go to everlast first or if another reply can give you a good location for them. Any how they seem to be cheap ($3.00 each) I think the correct ones from Ebay sold both male and female sections of the connector not just the cable end.
    have fun
    Tom
    Last edited by acourtjester; 08-28-2011 at 02:02 AM. Reason: additional info

    Everlast PM256
    Millermatic 180
    Hypertherm PowerMax 65 with machine torch
    Longevity Force Cut 80I
    DIY CNC table for plasma/routing
    13" metal lathe
    Small Mill
    ect, ect.

  3. #3

    Default

    I think this is to one I bought the fit my PM 256 Ebay auction

    390146071306

    have fun
    Tom

    Everlast PM256
    Millermatic 180
    Hypertherm PowerMax 65 with machine torch
    Longevity Force Cut 80I
    DIY CNC table for plasma/routing
    13" metal lathe
    Small Mill
    ect, ect.

Similar Threads

  1. 250 EX Foot pedal
    By Dick Eue in forum TIG Welding (GTAW/GTAW-P)
    Replies: 5
    Last Post: 09-27-2018, 04:49 PM
  2. Foot Pedal Fix
    By Ron66 in forum TIG Welding (GTAW/GTAW-P)
    Replies: 1
    Last Post: 03-26-2012, 12:29 AM
  3. new foot pedal
    By hesstx in forum TIG Welding (GTAW/GTAW-P)
    Replies: 2
    Last Post: 12-16-2011, 05:26 PM
  4. Bad foot pedal?
    By sth212 in forum TIG Welding (GTAW/GTAW-P)
    Replies: 6
    Last Post: 08-21-2011, 08:50 PM
  5. Old Foot Pedal
    By McClary in forum TIG Welding (GTAW/GTAW-P)
    Replies: 3
    Last Post: 04-26-2010, 10:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •