I guess a feature like this is too much to ask out of a pick up truck...
@ least for a 220 outlet.
I guess a feature like this is too much to ask out of a pick up truck...
@ least for a 220 outlet.
As a man thinketh, so shall he be.
Miller Bobcat 3 Phase,
Miller Suitcase X-Treme 12VS wire feeder for the Bobcat with M-25 300A .045" gun / Bernard 400A 5/64" wire mig gun .
26 series gas cooled TIG torch, setup for quick connect to Bobcat.
17 series gas cooled Tig Torch for Low Amp Solar Tig (Direct Solar Panel Powered Tig welding)
Hobart Handler 187 Mig / Fluxcore
EVERLAST PowerUltra 205P
EVERLAST PowerTig 250 EXT 2013 Model
I am with DaveO, with less is more. Or keep it simple. When I see those drop down step rails all I see is one expensive fix when they fail. No thanks. I also couldn't get audio. Unless I am mistaken that plug on the passenger's side is a 110V. For 220v the blades would have to be horizontal, that or a 220v lock plug. Just my two cents.
Attitude Determines Altitude
Sorry Canada, but no, 220V would not have to be horizontal. The NEMA 6-50P would be vertical and parallel as in the picture.
Mark
performance@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x204
M-F 9am - 5pm EST