I-Mig 200 not sparking

[SeanMurphy265]

I did the same thing.... and then I plugged the chord!

[parkour]

The flowmeter should be mounted vertically to get accurate readings.

[Tritium]

As a person who had to do computer support for MANY years, Sad very sad. I had a co-worker call me and say her computer would not do anything. She was correct. She had not "turned it on". I pressed the power button and walked away shaking my head and resolved to GET OUT OF TECH SUPPORT forever. id10t was the term I applied to her.

Thurmond

[everlastsupport]

To back Mark up here, I have never had a call with someone not plugging in the MIG torch (in fact MIG calls are VERY rare). I have had few calls on which port to plug it into, but rare and it is in the manual.

Also, you should straighten your regulator up, the tube with the ball inside should be vertical. Otherwise you are going to waste your gas.

I was a little confused when I heard no spark, but saw welds on the steel in the pictures. Anyway. Hope you are up and running now. Mark asked you a couple times. And like Mark said, the manuals are updated/improved through-out the year and as we add/change features, so it is always recommended to download the manual.

I just bought an O-scope, I had read the manual before I even ordered the product.

[bigjoeinkg]

To back Mark up here, I have never had a call with someone not plugging in the MIG torch (in fact MIG calls are VERY rare). I have had few calls on which port to plug it into, but rare and it is in the manual.

Also, you should straighten your regulator up, the tube with the ball inside should be vertical. Otherwise you are going to waste your gas.

I was a little confused when I heard no spark, but saw welds on the steel in the pictures. Anyway. Hope you are up and running now. Mark asked you a couple times. And like Mark said, the manuals are updated/improved through-out the year and as we add/change features, so it is always recommended to download the manual.

I just bought an O-scope, I had read the manual before I even ordered the product.

Wish I knew you were in the market for an O'Scope. Maybe we could have worked out something.

[Ray]

Wish I knew you were in the market for an O'Scope. Maybe we could have worked out something.

not like his, I have it's little brother, I'm gona have to get one like Mikes also.
He's (gettin?) or has the quad ver. of the single trace unit I use almost every day.


Hey, didn't meen to come off like I did, just hate wasting freight and downtime, and well you know what I'm saying.

Ray

[bigjoeinkg]

Well, Mine is not a quad trace. It's a dual trace Tek 100MHz.

[everlastsupport]

Wish I knew you were in the market for an O'Scope. Maybe we could have worked out something.

I have a few portable storage scopes. This one is a toy.

My point was, with the net today, I read the manual before I bought the product.

PM me with location and what you have. Ray or I might be interested.