Sean,
I bet you got a really BAD feeling when you plugged that in and it died.
Thurmond
Member
Sean,
I bet you got a really BAD feeling when you plugged that in and it died.
Thurmond
Miller Bobcat 3 Phase,
Miller Suitcase X-Treme 12VS wire feeder for the Bobcat with M-25 300A .045" gun / Bernard 400A 5/64" wire mig gun .
26 series gas cooled TIG torch, setup for quick connect to Bobcat.
17 series gas cooled Tig Torch for Low Amp Solar Tig (Direct Solar Panel Powered Tig welding)
Hobart Handler 187 Mig / Fluxcore
EVERLAST PowerUltra 205P
EVERLAST PowerTig 250 EXT 2013 Model
Senior Member
I burned about 3-4 rods and then it quit. I was calm about it, that stuff can happen. I sent Mark a PM and he gave me a call to help me sort things out. I sent the pics to Mike in support and he also emailed me back with some help as well. I took the cover off and when I saw the fuse I was relieved! When I figured out it was my fault, I was glad I did not completely burn up the welder! It's always good to remain calm instead of showing your butt, especially when its your own fault!
Lincoln Eagle Engine Drive
Everlast MTS 250
Everlast Power Tig 225lx
HTP Mig 2400
Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
Miller Spectrum 375 Extreme Plasma cutter
Victor cutting torch
HF 20 Ton Shop Press
HF 4x6 Band Saw
HF Air Compressor
Northern Tool Drill Press
www.murphywelding.com
Member
Hey Sean, You might want to update your signature since the Millermatic is sold and the 140ST delivered.
Thurmond
Miller Bobcat 3 Phase,
Miller Suitcase X-Treme 12VS wire feeder for the Bobcat with M-25 300A .045" gun / Bernard 400A 5/64" wire mig gun .
26 series gas cooled TIG torch, setup for quick connect to Bobcat.
17 series gas cooled Tig Torch for Low Amp Solar Tig (Direct Solar Panel Powered Tig welding)
Hobart Handler 187 Mig / Fluxcore
EVERLAST PowerUltra 205P
EVERLAST PowerTig 250 EXT 2013 Model
Posting Permissions
Reply With Quote