New Member
Project 2 from Morgaj1
After getting tired of the el cheapo Harbor Freight welding cart, I decided to make my own. Our local steel yard had some odd shaped pieces at really low prices. So, I fished through it and found enough 2" square tubing to make this. There was an awful lot of work with a cup brush to get it clean. I bought the wheels at Harbor freight.
Hobart Handler 187
Thermal Arc 161S
Everlast Power Plasma 50
Member
Its beefy enough to support a house. Great Job. I need to build one for my Hobart and my Everlast plus 3 gas bottles and my Oxy / Acetylene rig, so I get ideas from each of these posted.
Thurmond
Miller Bobcat 3 Phase,
Miller Suitcase X-Treme 12VS wire feeder for the Bobcat with M-25 300A .045" gun / Bernard 400A 5/64" wire mig gun .
26 series gas cooled TIG torch, setup for quick connect to Bobcat.
17 series gas cooled Tig Torch for Low Amp Solar Tig (Direct Solar Panel Powered Tig welding)
Hobart Handler 187 Mig / Fluxcore
EVERLAST PowerUltra 205P
EVERLAST PowerTig 250 EXT 2013 Model
New Member
looks solid! what was the cost of Materials? I need to make one so bad!
"The object of war is not to die for your country but to make the other bastard die for his." --General George S. Patton
Member
im digging that. haven't made one yet but i need to looks like it could have more of a multi purpose than just a cart. shoulda gone with a color to match your welder lol but hey if that's all you had that's the route you go
Aaron
New Member
I've got about $80 in it.
Hobart Handler 187
Thermal Arc 161S
Everlast Power Plasma 50
Senior Member
Is that cost including wheels/casters? I know those are pretty expensive around here but online they are not bad. Last time I needed the I got a movers dolly and stole the casters from that as they were cheaper. I still need to build myself a cart but will probably order the casters online.
Jason
Everlast 255EXT - Perfection
Everlast PowerPro 256 - UPS Demolished
Everlast MTS200s
12 Ton Shop Press
DeWalt Hand Tools/ChopSaw
Senior Member
I built my cart with a movers dolly from Northern Tool that was onsale for $19.00!!!Originally Posted by Jason
Lincoln Eagle Engine Drive
Everlast MTS 250
Everlast Power Tig 225lx
HTP Mig 2400
Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
Miller Spectrum 375 Extreme Plasma cutter
Victor cutting torch
HF 20 Ton Shop Press
HF 4x6 Band Saw
HF Air Compressor
Northern Tool Drill Press
www.murphywelding.com
New Member
The caster were $3.99 each and the wheels were $4.99 each from Harbor Freight.
Hobart Handler 187
Thermal Arc 161S
Everlast Power Plasma 50
Posting Permissions
Reply With Quote