"This years project is to add some windows to knock down some the wind"
I have the same problem with my Fishing Cabin only the wind is mostly coming from inside.
Glen
"This years project is to add some windows to knock down some the wind"
I have the same problem with my Fishing Cabin only the wind is mostly coming from inside.
Glen
Everlast PP256
Everlast Imig 200
Everlast Power Ultra 205
P&H 400 amp A.C.
Miller 230 amp with Onan power
I lived in AZ for 3 years and never really seen any deer. Now I have been Iowa for 4 years and have seen more deer than I can count. I have almost hit them in my car more than a couple times. Friday night I had one almost run out in front of me. I probably could have stopped and pulled out a gun to shoot it 50 feet away. Here is IA, its not too hard to find them and I see them on crossing the interstate all the time and if there is water around then you are about guaranteed to seem them out in the fields.
Jason
Everlast 255EXT - Perfection
Everlast PowerPro 256 - UPS Demolished
Everlast MTS200s
12 Ton Shop Press
DeWalt Hand Tools/ChopSaw
its one thing to see them along the road..but out in the woods they are now where near as bold
sold my miller mig
got a PT250EX
saving up for a plasma cutter
MY wife got a muley 2 weeks ago today. Still haven't got the Jeep Patriot back though. $5200 repair bill.
Thurmond
Miller Bobcat 3 Phase,
Miller Suitcase X-Treme 12VS wire feeder for the Bobcat with M-25 300A .045" gun / Bernard 400A 5/64" wire mig gun .
26 series gas cooled TIG torch, setup for quick connect to Bobcat.
17 series gas cooled Tig Torch for Low Amp Solar Tig (Direct Solar Panel Powered Tig welding)
Hobart Handler 187 Mig / Fluxcore
EVERLAST PowerUltra 205P
EVERLAST PowerTig 250 EXT 2013 Model
Here in olel Virginia where I live you have to use a blackpowder, shotgun or bow on deer. Talk about hunting or long range target practice. How about ground hogs at 500 - 600 yards. We all know that every part of our great country has different aspects of hunting. Talk to someone from Montana or the Rockies and they will tell you if you don't walk 15 miles and climb several thousand feet you have been hunting yet. The thing is, we have the freedom, or what's left of it, to persue our hobbies as we see them. Either banging on a keyboard, striking an arc, fishing or hunting. That is the persuit of happiness.
Lincoln Weld-Pak 100 (C-25 or CO2 Shield)
Victor Oxy-Act
Lincoln AC225 Tombstone
Everlast 250EX & W300 Cooler
Funny thing about shotgun or muzzle loader hunting is there is not much difference anymore. Some of these new slug guns with riffled barrels and sabots will shoot 150-200 yards easily.
Lincoln Eagle Engine Drive
Everlast MTS 250
Everlast Power Tig 225lx
HTP Mig 2400
Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
Miller Spectrum 375 Extreme Plasma cutter
Victor cutting torch
HF 20 Ton Shop Press
HF 4x6 Band Saw
HF Air Compressor
Northern Tool Drill Press
www.murphywelding.com
Yeah, seems everyone is trying to improve on everything. I get strange looks when I still measure my powder instead of using the preformed pellets. Just an old habit/hobby. Doesn't take much to hunt from the edge of a field. The woods are different, limited visibility and all. I used to hunt in WV with a rifle. Anything within 400 yds (worked out strip mine) was no match. Kind of took all the sport out of it. Now, the most yardage I can see and shoot is 60 yds. Sometime so close you can watch their eyes move. Now that is hunting when you have to wait for a deers head to get behind a tree so you can bring your rifle up and hold it there for awhile.
Lincoln Weld-Pak 100 (C-25 or CO2 Shield)
Victor Oxy-Act
Lincoln AC225 Tombstone
Everlast 250EX & W300 Cooler
yeah a mossberg 695 pair up the the hornady sst's...alomost like shooting a riffle. Really getting into bow hunting the past few years, and took a real nice 9point last fall that was 6 yards a way from the tree....
sold my miller mig
got a PT250EX
saving up for a plasma cutter