Bummer

[everlastsupport]

I have not made any sort of contact with anybody at Everlast yet. Being the weekend and all. On Monday I will get this sorted out. Most likely I'll just buy a dinse connector, some cable and a clamp. I would like to buy a plasma cutter in the future so having an extra work clamp for it won't hurt.

Yea, you can then use the extra clamp and an extension clipping them together too. Had to do that on occasion. Sorry about the screw up.

[RV8guy]

Just a little update. Today, off came the SMAW electrode holder and was replaced with the work clamp. This worked out well. Various things were welded on to test out all machine functions. The only issue that came up was the display is INOP. Will definitely be calling on Tuesday to get that taken care off. All in all I like this little welder. Much more convenient to use than my friends Cyber-Tig 300.

[performance]

RV8,
What was the issue with the display? Would it not work at all? Give symptoms here if you can.

[RV8guy]

At no time did I ever see the display light up, regardless of machine settings. I even watched the display as my friend welded, nothing.


Brandon

[morgaj1]

What came of the display issue?

[RV8guy]

Well, it turned out that I had two disconnected wires. With help from Ray at Everlast we determined where they go. I have a Mouser catalog here so I need to dig in it to find the right connector and pins. It's been on kinda a low priority due to the summer heat. It's actually hotter in my shop than it is outside.