Results 1 to 1 of 1

Thread: Project # 2 Welding table

  1. #1

    Default Project # 2 Welding table Yotarover

    Attachment 2181

    dont remember the specs on this thing very well. but i made it from 4x4" rec tubing for the legs they were over 6' long. top is a 1/8" thick steel sheet 5'x6'L . needed something solid to weld on and this thing worked great. welds were solid and clean was strong enough to have hold up completely asseimbled toyota 22re engines (i strapped them down to keep them from falling). each end of the tubes were open to slide in pipe ,rods,etc or sliding in my drill press or chop saw when i need a good solid base. total cost was around 200 for all the material(not the welding rods )
    Last edited by yotarover; 06-11-2011 at 08:36 PM.

Similar Threads

  1. Project 2 from agent4573. Category: Welding Table
    By agent4573 in forum Hobyist Projects
    Replies: 19
    Last Post: 02-18-2013, 04:04 AM
  2. Project 2 from KSmith. Cateory: Welding Table
    By KSmith in forum Other Custom Fabrications
    Replies: 19
    Last Post: 05-18-2012, 05:46 AM
  3. Project #2 from charger 891 hd welding table
    By charger891 in forum Other Custom Fabrications
    Replies: 13
    Last Post: 03-04-2012, 12:44 PM
  4. Project #2 Portable welding table
    By Buzz in forum Hobyist Projects
    Replies: 4
    Last Post: 01-16-2012, 04:18 PM
  5. DVA Project #2: Welding Table
    By DVA in forum Other Custom Fabrications
    Replies: 18
    Last Post: 12-07-2011, 11:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts