Share
Page 4 of 6 FirstFirst ... 23456 LastLast
Results 61 to 80 of 109

Thread: New CONTEST JUNE 1-JULY 31

  1. #61

    Default

    Post Count Started at 0, I currently have 70 after this post.
    Projects:

    1- 2005 Subaru Forester Turbo
    2- Intercooler Splitter
    3- Penn State Paper Weight
    4- Battery Terminal Boot Notcher
    5- Battery Terminal Durability Tester
    6- Subwoofer Enclosure
    7- Ski Speed Ramp and Rail
    8- Bandsaw Stand
    9- Gauge Pod
    10- Desk Top Tripod
    11- Terminal Shearer
    12- Terminal Post Puller
    Brandon Raineri
    The Pennsylvania State University
    Studying Industrial Engineering

    Everlast PowerPro 205
    Everlast I-Mig 200
    SpeedGlas 9100x
    Milwaukee 14" Dry Cut Saw
    Craftsman 6"x48" Belt Sander with 9" Disc Sander

  2. #62

    Default

    Did I overlook one of the rules that we had to do a recap post listing off the projects?
    sold my miller mig
    got a PT250EX
    saving up for a plasma cutter

  3. #63
    Join Date
    Mar 2011
    Location
    The Boonies of Texas
    Posts
    420

    Default

    Quote Originally Posted by dgarnier View Post
    Did I overlook one of the rules that we had to do a recap post listing off the projects?
    Not that I read! I am just wondering since I had over 120 additional post if the second 60 counts as another entry.

    Thurmond
    Miller Bobcat 3 Phase,
    Miller Suitcase X-Treme 12VS wire feeder for the Bobcat with M-25 300A .045" gun / Bernard 400A 5/64" wire mig gun .
    26 series gas cooled TIG torch, setup for quick connect to Bobcat.
    17 series gas cooled Tig Torch for Low Amp Solar Tig (Direct Solar Panel Powered Tig welding)
    Hobart Handler 187 Mig / Fluxcore
    EVERLAST PowerUltra 205P
    EVERLAST PowerTig 250 EXT 2013 Model

  4. #64

    Default

    No, but it helps to speed up the process of verification.

  5. #65
    Join Date
    Mar 2011
    Location
    The Boonies of Texas
    Posts
    420

    Default

    OK here are my stats:

    Beginning post count is 113 I will need 173 to qualify. Qualifications met 16 June 2011.

    3 Projects:

    Project 1 Third Hand in Forum Projects Other Custom Fabrications
    Project 2 Tractor Seat Stool in Forum Projects Other Custom Fabrications
    Project 3 Solar Tig Welding in Forum Projects Hobbyist Projects

    total Post 238 so if the second 60 post count as an additional entry then 2 entries for posting and 3 for projects. total 5 entries possible

    Thurmond
    Miller Bobcat 3 Phase,
    Miller Suitcase X-Treme 12VS wire feeder for the Bobcat with M-25 300A .045" gun / Bernard 400A 5/64" wire mig gun .
    26 series gas cooled TIG torch, setup for quick connect to Bobcat.
    17 series gas cooled Tig Torch for Low Amp Solar Tig (Direct Solar Panel Powered Tig welding)
    Hobart Handler 187 Mig / Fluxcore
    EVERLAST PowerUltra 205P
    EVERLAST PowerTig 250 EXT 2013 Model

  6. #66

    Default

    I started with 148 posts, now at 249.

    Projects:

    1. Pickup Tuck Bed Extender

    2. Steel Automatic Driveway Gates and Stonework.

    3. Restoration of 110 year old Barn

    4. Knock down Fishing cabin

    5. 4 Stall & Hay Loft Barn addition

    6. Aluminium Fingertable for Auto Dovetail Machine

    7. Stainless & Al. Rear set for Egli-Vincent Motorcycle

    8. Another Auto Driveway Gate Setup

    9.Tig Weld Bandsaw Blade

    10. Stainless Steel Side Stand for Egli-Vincent

    11. Ossa Motorcycle Al. fender fab and install

    Glen
    Everlast PP256
    Everlast Imig 200
    Everlast Power Ultra 205
    P&H 400 amp A.C.
    Miller 230 amp with Onan power

  7. #67

    Default

    Hello... I started with 0 posts, but this thread did not count me in till 15. So I posted 15 extra posts to be on the safe side. I needed 60 to qualify, & by yesterday I had 75.

    Projects
    Project 1 * A work in Progress *
    Project 2 ( Portable weld cart)
    Project 3 # Security Modification #
    Project 4 * Work Bench *
    Project 5 ( DiY tig torch cooler )
    Project 6 * Alloy Wheel Repair *
    Project 7 ^ Custom Wheel Design ^
    Project 8 % Side Job %
    Project 9 * Tool Cabinet *
    Project 10 " Another Work in Progress "
    Project 11 * Tig torch holster (x2) *
    Project 12 ^ Jig for sm. scale wheel (5 spoke) ^
    Project 13 ( Rollpan & shaved tailgate handle )
    Project 14 @ Portable camera phone mount @
    Project 15 % Aluminum wheel repair #2 %
    As a man thinketh, so shall he be.

  8. #68
    Join Date
    Mar 2011
    Location
    Springfield, Illinois
    Posts
    139

    Default

    Don't forget me!!! I started with 70 posts and ended with 138 posts with a total of 2 projects.

    Reil Burner (Oxide00 Project #2)
    HVAC antitheft Tool/Equipment Cage - Oxide00 Project #1

    Good Luck everyone!!
    (Wow lot of projects here!! Better step my game up next time!!)
    Completed Midwest Technical Institute 40 week welding/pipefitting school!!
    Attending Lincoln Land Community College - Degree in Computer Programming

  9. #69

    Default

    In typical fashion, I waited till the last day to enter a project. I know i dont have enough posts.

    project 1, a walkway addition.
    Everlast lx225
    Hobart Handler 210 with spool gun
    Hobart Stickmate LX
    Thermal Arc 400GMS
    40 amp Northern Tools plasma torch
    130 chicago electric tig welder
    90 amp chicago electric flux mig
    10"-22" Grizzly lathe
    15"-5.5" Grizzly vertical end mill

    In need of nice TIG machine. drooling over PowerTig 250ex

  10. #70

    Default

    started with 205 ended at 267
    project 1, from dgarnier, a racoon skiner
    project 2, from dgarnier, a Fish tank rack
    project 3, from dgarnier, a Deer Condo
    project 4, from dgarnier, a bowfishing spot light
    project 5, from dgarnier, from reloading room to fish room
    project 6, from dgarnier, Fillin' holes
    project 7, from dgarnier, From rag top to Hard top
    project 8, from dgarnier, Weasel/Chipmonk Box
    sold my miller mig
    got a PT250EX
    saving up for a plasma cutter

  11. #71

    Default

    So, the contest is officially over. I will get together all the qualifiers over the next 24 hours or so....I'll have to go and take a look at some of the projects and posts just to keep everyone honest...Then Oleg will draw out the winner and we'll announce it.

    IF everyone that entered, wants to sum up their qualifying post count and projects here, it will be easier and quicker...I'll still run through them all, but it will help.

    Thanks, and much appreciation to all who participated....One thing for sure, the odds of someone winning a very nice prize is about as high as you could get. Someone is going to have a very nice unit very shortly in hand, that didn't cost them anything but a little time and effort.


    Mark

  12. #72
    Join Date
    Dec 2009
    Location
    Greater Seattle, WA
    Posts
    813

    Default

    95 posts during contest
    20 project threads during contest

    current post count: 312
    post count at contest start: 217

    Racing Kayak Rudder Linkage (stainless steel TIG - jakeru's #20)
    Using Helium for Aluminum Wheel Repair (jakeru's #19)
    Aluminum Boat Fuel Tank Support Structure (jakeru's #18)
    Custom Toyota 4-cylinder Intake Manifold (jakeru's #17)
    Aluminum Cartop Boat Transom Gussets (jakeru's #16)
    EGR Valve Removal (jakeru's #15)
    Hydraulic Aluminum Boat Lift Repair/Reinforcement (aluminum TIG welding) jakeru's #14
    custom wastegate linkage (stainless steel TIG welding) jakeru's #13
    Racing Wheel Center Lightening (Finite element analysis /CNC Milling) jakeru's #12
    Custom Harley Fuel Tank (jakeru's #11)
    Aluminum diamond plate flooring, for a fishing boat (jakeru's #10)
    Dune buggy TIG welding (aluminum motor mount repair/improvement) - jakeru's #9
    Aluminum Boat Fishing Rod Mounting Plates (jakeru's #8)
    VW Camper Van Exhaust/Muffler (jakeru's #7)
    Jeep cast aluminum Power Steering Pump bracket TIG weld repair (jakeru's #6)
    Cracked Volvo and Axxis aftermarket wheel TIG welding repairs (jakeru's #5)
    Boat trailer crank handle TIG weld repair (jakeru's #4)
    "aluminum project" (jakeru's #3) welded with Miller Dynasty 350 vs Everlast Super200P
    Clogged Intake Manifold Cleaning (jakeru's project #2)
    Project 1 from jakeru: Outboard Motor Skeg Repair (TIG aluminum)
    '13 Everlast 255EXT
    '07 Everlast Super200P

  13. #73

    Default

    Started post count at 91.. Current is 174

    Project 1 from Jason: Windshield Leak Fix.
    Project 2 from Jason: Strut Tower Fix.
    Project 3 from Jason: Fender Roller.
    Project 4 from Jason: Shaved VW Decklid.
    Project #5 from Jason: Exhaust #2.
    Project #6 from Jason: Euro Radiator Support Repair.
    Project #7 from Jason: 12 valve VR6 Half Build.
    Project #8 From Jason: Transmission Limited Slip Diff Install
    Project #9 From Jason: Valve Spring Swap
    Project #10 From Jason: Stripped Lug Bolt.
    Project #11 From Jason: MK3 AWD 3.4L Twin Turbo Jetta
    Project #12 From Jason: Shaved fender+Body work.
    Project #13 From Jason: Aluminum Catch Can
    Project #14 from Jason: Scout


    That should qualify for 15 entries. Thanks!
    Jason
    Everlast 255EXT - Perfection
    Everlast PowerPro 256 - UPS Demolished
    Everlast MTS200s
    12 Ton Shop Press
    DeWalt Hand Tools/ChopSaw

  14. #74

    Default qualifiers

    Here's what I was able to ascertain as post counts and entries, if anyone has a different figure please let me know. Those of you who didn't follow the form, about posting projects with project numbers, may not have yours completely counted. 60 count post entry has been included. This is total of the qualifying post and the added projects.

    Jason : 15

    Jakeru: 21
    Dgarnier: 9
    Tritium: 4
    Worn Torn : 12
    Sean Murphy: 6
    Scootarida1: 13
    Oxide00: 3
    D3javoodoo: 16
    Chadrock: 15
    Acourtjester: 1
    Jtybt: 6
    Yotarover: 5
    Ogorir: 4
    DaveO: 3
    Last edited by performance; 08-04-2011 at 06:58 PM.

  15. Default

    I got 107 posts during the 2 months.


    Projects during the contest:
    Replica cannon
    Nautical belt buckle
    Bow railing for boat
    Swim platform for boat
    Convert Casio foot pedal to Tig pedal
    Charlie

    Everlast 225 LX
    Everlast PP 50

    HF 130 TIG/90 ARC
    HF 90 fluxcore

    ATX MIG (don't ask)

  16. #76

    Default

    jtybt,
    You did not follow the form to post. Yours don't show up under the form we requested and specified in the contest rules. I am not sure if its fair to others, but under the spirit of good will, we will amend yours to 6.

  17. Default

    OK, Thanks mark. I guess I just didn't understand how to set up the project count.

    I still have many projects not all relating to welding that I haven't posted. Waiting for the next contest.
    Charlie

    Everlast 225 LX
    Everlast PP 50

    HF 130 TIG/90 ARC
    HF 90 fluxcore

    ATX MIG (don't ask)

  18. #78

    Default

    Thank you all who participated , i will announce the winner on Friday !
    Oleg Gladshteyn
    Phone: 650 588 8082 / 877 755 WELD
    Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
    Email: oleg@everlastwelders.com
    Website www.everlastgenerators.com

    www.linkedin.com/pub/oleg-gladshteyn/48/b08/875

  19. #79

    Default Winners !!

    Thank you all again for making this contest another success

    FIRST PLACE : Jakeru With PowerMTS 200

    SECOND PLACE: WornTorn with PowerMig 200

    everybody who didnt win get 50% off on ONE TIME purchase of one welder or cutter
    offer has no expiration.

    Jason
    Tritium
    Dgarnier
    Sean Murphy
    Scootarida1
    Oxide00
    D3javoodoo
    Chadrock
    Acourtjester
    Jtybt
    Yotarover
    Ogorir
    DaveO
    jtybt

    For next contest we will do new PowerTig 250EXT !!!
    Oleg Gladshteyn
    Phone: 650 588 8082 / 877 755 WELD
    Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
    Email: oleg@everlastwelders.com
    Website www.everlastgenerators.com

    www.linkedin.com/pub/oleg-gladshteyn/48/b08/875

  20. #80

    Default

    Congrats all!
    Gerald

    Millermatic 251
    Spectrum 300 Plasma
    Everlast PowerTig 250EX
    Everlast PowerCool W300
    Harris / Victor OA
    Craftsman 13 Speed Drill Press
    ProTools Air/Hydraulic Bender
    48" Brake, 72" Brake, 52" Stomp Shear
    Mitler Bros. 36" High Throat Bead Roller
    Compressor, Notchers, Grinders, etc.

Similar Threads

  1. 2013 Summer Time Contest. June 21- October 1 2013
    By performance in forum Everlast Announcements, Contests and Promotions
    Replies: 54
    Last Post: 04-12-2014, 02:42 AM
  2. winter time contest Q: does this count as a video for the contest?
    By Spike in forum Everlast Announcements, Contests and Promotions
    Replies: 3
    Last Post: 01-21-2013, 04:16 PM
  3. New (almost) Summertime Contest July-15th-October 15th.
    By performance in forum Everlast Announcements, Contests and Promotions
    Replies: 92
    Last Post: 11-09-2012, 01:28 AM
  4. Everlast Canada Moving Sale Ends July 30th
    By Titan winch in forum Everlast Announcements, Contests and Promotions
    Replies: 1
    Last Post: 07-10-2011, 02:10 AM
  5. Contest
    By Canada in forum Introduce Yourself
    Replies: 0
    Last Post: 04-08-2011, 03:04 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •