Just got my 225LX and tried it out

[performance]

AC is 20 amps. DC is 5.

Turn your down slope to minimum and turn your switch to 2T.

[DiabolicZ]

AC is 20 amps. DC is 5.

Turn your down slope to minimum and turn your switch to 2T.

Down slope is off, pulse is off. Everything is off. Only thing I use is the foot pedal. That is typically how I weld. I thinks it's just going to be me getting used to it is all. Every machine runs a little differently.

[DiabolicZ]

Here you can see how much smaller the Everlast is compared to the Lincoln.



Here is my first AC weld with the Everlast. This weld was done before I figured out you are NOT supposed to run the green 100% pure tungsten. Not perfect, but not bad for just setting the knobs on the first try and going with it.


I have a video too, but it is pretty boring.

[DiabolicZ]

http://www.youtube.com/watch?v=euk-OJFTfVI