Share
Results 1 to 7 of 7

Thread: Bobcat TIG Acessories

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 03-21-2011, 12:50 AM #3
    Tritium's Avatar
    Tritium
    Tritium is offline Member
    Join Date
    Mar 2011
    Location
    The Boonies of Texas
    Posts
    420

    Default

    Thanks very much jakeru,

    I have an argon regulator and flow-meter already. I can get a bottle easily. Do you have any recommendations concerning what to look for or avoid in a low cost torch assembly?

    Would this one be good?

    Radnor® Model 17FV-25-R 150 Amp Air Cooled Flexible Head TIG Torch Package With 25' Lead, Rubber Power Cable And Valve found here

    http://www.airgas.com/browse/product...ct=RAD64005478

    Thurmond
    Last edited by Tritium; 03-21-2011 at 01:25 AM.
    Miller Bobcat 3 Phase,
    Miller Suitcase X-Treme 12VS wire feeder for the Bobcat with M-25 300A .045" gun / Bernard 400A 5/64" wire mig gun .
    26 series gas cooled TIG torch, setup for quick connect to Bobcat.
    17 series gas cooled Tig Torch for Low Amp Solar Tig (Direct Solar Panel Powered Tig welding)
    Hobart Handler 187 Mig / Fluxcore
    EVERLAST PowerUltra 205P
    EVERLAST PowerTig 250 EXT 2013 Model
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules