Search:

Tig Welder Everlast AC/DC Power Tig 250 EX for sale
This is very low use hobbyist Tig welder manufacturing date 2015.
Come with new water-cooled WP-20 and air-cooled WP-9 torches, with...

My HV start died and I contacted the repair center exchanged info about date/model of the Tig (mine was a non-Gap model). They ordered a HV mod from China to replace mine (with an external...

Sold to a metal artist

For Sale 4’ X 8’ CNC Plasma cutting table complete turn key includes PC controller and Longevity Force Cut 80I plasma with Proma THC. With full licensed Mach 3 software put it in your shop and...

For Sale 4’ X 8’ CNC Plasma cutting table complete turn key includes PC controller and Longevity Force Cut 80I plasma with Proma THC. With full licensed Mach 3 software put it in your shop and...

Here is a router table I built for my daughter its about 2’ X 3’ . The red box is the electronics package it uses a USBCNC cad so she and hook it to a laptop. It has a 2.25HP Hitachi router to...

It helps I'm retired and 70 I have another set of plans for a bead roller that I have sold 225 sets in 13 countries.
there are sll kinds of plans out there and the web has made them easy to fine and...

as of 2/25/14 69 sets of plans have been sold with 11 buying the cut steel parts with the plans. Change of shipping for the parts (Post Office went up) is $18.00

have fun
Tom

Here is a copy of my table built using my plans...

NO positive and negative thing is on everybody’s plasma table. After looking are the sign cut you have posted it looks like a cut path is interrupted from cutting. Lets say you are cutting a...

something that may help with cutting is to attach the work ground directly to the metal you are cutting.
Here is a ground clamp I made for mine it is small and will not get in the way of cutting

Here are pictures of my electronics controller all in one box. Box has computer, hard disc, power supplies, drivers, and the BOB board. Keyboard, mouse and monitor are inside the top cover. The...

The floating head assembly is simple it is a linear slide, base plate, bar with torch mounting rings attached and the switch. The base plate is drilled to mount on the moving part of the Z axis the...

try two things there is a reset in the THC box click on it to clear out old setting.
and upder ports & pins (mill options) no checks in the THC options boxs

Now the Z drive assembly I used 16mm linear bearings and shafts for the guides on this axis. I bought then from Ebay I bought a 30” shaft a cut it to length 2 long linear bearing (scs16luu) and 4...

You can use Mach 3 and sheetcam free for cutting small parts up to 150 lines of code. The license cost about $150 to $175 each. I use my everlast PM256 for a short time on my first table.
I used...

little added info you said dry table knock off anotehr $100 for the water table but youwill still need the grill to suport the material your cutting.

I would say $1300. with new materials, if you have some material you can use that will bring it down. I bought a refurb PC to run mine if you have one you can use thats more you can save. On my...

Yes you may be able to run the mach3 plasma I think that was what I was running before floating head. You will still need to select THC so the signals from the THC control the torch movements. I...

Here is the Y drive assembly I used rack and gear as it is simple. I also gear reduced the drive for good precision of movement. The drive components are located behind the Y slider to leave room...

One thing I have found buying a plasma unit is be sure you have the availability of different tip sizes. Most venders that sell a 60 or 80 amp unit supply it with tips that are for max cutting like...

yes sir the Z limit and home switch is used to detect the end of travel for that axis. The floating head switch is only used to detect the metal when Mach tell the torch to go down and when it...

Yes I do have a switch on the floating head assembly. I have all of home and limit switches in series and it works fine. If I a not using the floating head I have a jumper plug that is to by-pass...

Here are a few pictures of what I do I don't tighten the chain like a guitar string and I have it supported by flat stock so it acts like a rack. I don’t have problems with the 4X4 table but the 4X8...

Thanks Sportbike
Back to work on the X drive components on the table. I used a chain drive as it is simple and cheaper then a rack. I used a cross shaft so I did not need a second motor for the X...