Search:

Seems most everyone has fallen to the keyboard baiter Mark you need't fall for this crap
.2013 250EX, happy customer,service/advice dept excellent.

Good info/place to start from.

Same problem. Changed mine,took numbers from switch,Googled and ordered. Simple install.

No research, No RTM, = never happy.

Performance answers clear,concise.

Rtfm!**&&*%

Most times my manual knows more about my machine than I think I do.;) It also retains the info better than I do.

NAPA fuel injection hose clamp
As stated "Oetiker style clamps"

Hand will get toasty with the air cooled 20 ,need thick mig style gloves(clumsy)
I have both series 9 air/gas cooled for tacking and series 20 water cooled for long welds(length/duration). Everlast...

Quartz, works fine,real fun to cut to length:D:P need good diamond impregnated wheel,not glued to steel back stuff. The dust:(

Automatic Transmission line NAPA

Empty questions like this beg a smart answer.

now give the forum some real info on the problem

Tig likes draft free environment.Call Everlast to get torch and pedal of choice with welder package. CK flex head are my choices. Think water cooled for amperages/duty time above 150 amps(1/4"...

My 250EX on/off acted same way removed switch to get at the bottom screws for the main feed wires, tightened and solved the switch. Stock pedal is funky and off/on micro can hang up along with the...

Effort = Reward

Most machine problems are operator error induced.

"rtm".......

My 250ex
1/8 tungsten doesn't start as easy as 1/16
My rhythm is less than .5 sec preflow,tap pedal, touch work piece with tungsten,position torch,initiate with pedal and gradual increase to weld...

The dreaded GREEN UMBRELLA arc is contaminated tungsten. Source?(many possibilities).
Argon flow will vary by tank size and psi in tank,check flow at start of weld and occasionally during the...

congrats
seat time, seat time, seat time,read everthing you can find on tig,watch videos(beware of BS vids)
don't be afraid to twist the knobs max each way and note the results
On AC the more...

operator error ,I damaged the potentiometer in the pedal. Called tech,Ray, late in the day. Arrived 3 days later USPS on Sat.

Great service
Thanks Everlast crew

AS MARK said. " but typically, people blame the machine before they look elsewhere for the cause of the problem"

Some times my skill level isn't as good as the machine.

some people don't/won't/can't assimilate the info at hand.
others TROLL
ON my 250EX, problems have been operator error induced RTM (then reread)

eack pedal tap starts another preflow sequence

check for pre flow .5-1 s,check for post flow 5-10s enough to keep tungsten shiny clean for the next arc strike