Search:

Maybe I'm not looking in the right places but I have a EXT 210 and have I think it's a 24 series torch from CK. Problem is the torch is 25 Dinse and the machine is 35 Dinse. Where can I get an...

was the ground clamp I changed it and works like a champ

I'll check those. what else is in the system that's not on the board?

Ok got the new board today and swapped it out. Exact same problem, everything works but absolutely no arc initiation.

What do I pull to change the board? I tried to pull off the front cover, removed the 2 top and 2 bottom Phillips screws and it won't come off. I didn't pull hard and stopped trying as I didn't want...

I have an I-mig 140E and getting sent a new board, anybody have instructions on how to do this?

yes wire feeds find, gas comes out, fan is on, the green light is on. Everything works like normal except no arc.

I have checked the lugs, I have seated and reseated the ground clamp. Have not reseated the mig gun so i'll try that. I shot Ray an email so we will see what he says.

I have an I-mig 140E and yesterday it stopped initiating an arc. I thought it was maybe overheated even though the light never came on and it never shut down. I let it sit for like 30 min and it...

On the standard mig gun that comes with the I-mig 140 what is the liner made of? Is it Teflon or just steel?

Ok I looked online and for example if using .035" wire the conversion to amps goes like this. 360ipm wire speed max divided by 1.6 right. so 360/1.6=225A. Ok now first is that right? and my...

all great advice, thanks guys. and yes I will go one size above on the tip. Didn't know about the wire between 4043 and 5356 so i'll get the 4043 stuff.

My dad has been a welder for 44 years and he used my 210EXT and he was highly impressed. I just bought a mig I-140E and it's a nice little machine. I been welding galvanized and I cannot wait to...

Ok main point for spool gun is for the feeding of aluminum wire right? I loaded my I-mig 140 with some .030" aluminum wire and it feeds just fine. I know there will some contamination from the...

Well I have two ever last units and they seem to get the details right, how does the ever last spool gun work?

I was wondering if the spool gun 140 from longevity is any good? I seen their site its on sale from $309 to like $175 right now. And I am assuming it would fit my I-mig 140? I really don't want to...

Yes I switched the polarity

Yeah I usually have a big fan blowing it out since it's flux core I can have good airflow. I was using Lincoln ER70S-6 with 80/20 Argon/CO2 and holy #### the spatter I was getting. I know it's...

Ok I wanted to get a few different mig wires to see what works best on galvanized so I got blue demon er70s-2, blue demon silicon bronze, blow demon e71t-gs, Lincoln er70s-3, and er70s-6. Just...

Can somebody measure their 210 ext for me? I want to build a dual welding cart but my tig is in the states. Thanks

I really dont need a tig I have a 210 ext at home I seem to like the mts 200 either that or the I mig 200 but the mts has more options. Good point tho, I'll try to sell it here

I am open to reasonable offers but remember it's only a week old so don't try to rape me. I have one 2 lb spool ran through it.

I am stationed in Japan but can ship through the post office like normal shipping

Ok manual says voltage range is 15.3-21 thought there maybe a bigger difference and static voltage is 60V. Maybe just needs to have friend watch the volt meter for me

I tested it and didn't make any sense at all. I did static test without striking the arc, I loosened drive roll and tested voltage. All the way to each extremem on the voltage dial I got 56-59...