Search:

Type: Posts; User: watercooler

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Replies
    6
    Views
    4,063

    Trust me you will save yourself a lot of...

    Trust me you will save yourself a lot of grief.What I notice is my arc starts are a lot better due to better grounding,I use to have a lot of sputtering when welding and now I know why.It will make...
  2. Replies
    6
    Views
    4,063

    It's looks great blaster and it looks like you...

    It's looks great blaster and it looks like you have screws holding the weights to the shaft which is good for when you want more or less down force.
  3. Yeah I have seen couple too but at least with...

    Yeah I have seen couple too but at least with this one majority of the work is done and all it takes is a few small mods and you will be on your way.Did I also mentioned that foot pedal pulsing is...
  4. Replies
    6
    Views
    4,063

    Yeah ,I originally planned on cutting the...

    Yeah ,I originally planned on cutting the Chisel#in half but after seeing what it did to my saw blade haha I had no choice but to have a change of heart and made it the way I did which turn out to be...
  5. Maybe a small box to store them in because you...

    Maybe a small box to store them in because you will have pieces of all different sizes and having a container as the one I built wouldnt work great in this situation.
  6. If thats the case then its better to just install...

    If thats the case then its better to just install the correct pot then.I got the information from this website and just remembered it said this at the bottom (The resulting value can fluctuate as the...
  7. Correct Rambozo,there are many ways you can mount...

    Correct Rambozo,there are many ways you can mount a switch that will accommodate your interest.The sky is the limit and your imagination is always free,just put it to logic and reap the rewards.
  8. Its a DIY and I understand that some people might...

    Its a DIY and I understand that some people might not have any soldering skills but if we can tig weld (which is harder) I don't really see soldering 5 wires and making 2 tacks a issue.It will save...
  9. That is incorrect,this method will give the pot...

    That is incorrect,this method will give the pot full linear coverage from point A (start) to B (end).I have been working on this for a couple weeks and done some research and tests and by far this is...
  10. Specs on both OEM and VOX....

    Specs on both OEM and VOX.
    http://i6.photobucket.com/albums/y203/studioface/Foot%20pedal%20Tig/IMG_12851_zps31663e4a.jpg...
  11. DIY : How to make your own durable,cost effective and low profile foot pedal\control.

    Hello again and today I will be showing you how to make your very own foot pedal for your Tig welder.The only part you will need from your existing foot pedal is the cable with the 7 pin connector...
  12. That makes perfect sense with the notching of the...

    That makes perfect sense with the notching of the caps Andy,thanks for the insight I shall do the same :).
  13. Thanks Mark I will grab some joiner and pipes the...

    Thanks Mark I will grab some joiner and pipes the next time I am at the store.
  14. DIY : How to make a filler rod storage container\tubes on a $20 budget.

    Ok I wanted to do this the first time I bought my welder but I just didn't have the time.So this weekend I got fed up of leaving my welding table just to grab some more filler rod that I went to home...
  15. Replies
    6
    Views
    4,063

    Show me your 3RD / Third hands !!!!

    Hey all,so I made this thread to show off mine and everyone's third hand.We all know imagination goes a far way so show us your little helper!.For those who dont know what a third hand is its a...
  16. I only have the chrome foot pedal left!

    I only have the chrome foot pedal left!
  17. Replies
    8
    Views
    17,165

    His welds crack because he might not have gotten...

    His welds crack because he might not have gotten enough penetration down to the root of the crack and only did a cover up so the crack was still present underneath.Your way is pretty good seeing that...
  18. Thread: Fish boxes

    by watercooler
    Replies
    6
    Views
    2,654

    Great work they look like they just rolled off a...

    Great work they look like they just rolled off a machinery assembly line.
  19. Ha ha,I never did it was a project I worked on.I...

    Ha ha,I never did it was a project I worked on.I got 3 and using one so the other 2 have to go.
  20. (Qty 2) Tig welder Foot Pedal Aluminum construction,Light Weight, low profile & cheap

    I have 2 modded Vox foot pedals thats in super great condition both have new 47K ohms potentiometer for the everlast powertig 200DX.If your welder
    uses a different potentiometer you can purchase it...
  21. Replies
    23
    Views
    7,643

    Its in a hobbyist setting with light to heavy use...

    Its in a hobbyist setting with light to heavy use and 3 to 4 days per week depending on the project.
  22. Replies
    23
    Views
    7,643

    Nice to know my 200DX is still up there with the...

    Nice to know my 200DX is still up there with the big boys and I am going on 1 year so far and no issues with my welder.Sorry to hear about your welder OP but you are in good hands and I hope your...
  23. I second that and its nice and thin too so you...

    I second that and its nice and thin too so you are still left with some sensation when welding and working.
  24. Replies
    8
    Views
    3,228

    Ha Ha I thought it was me alone that noticed the...

    Ha Ha I thought it was me alone that noticed the different sound (thin metal sound) when porting by hand which means stop and check wall thickness measurements before you blow a hole and have to go...
  25. Replies
    13
    Views
    5,302

    Trust me you have not felt nothing like the...

    Trust me you have not felt nothing like the flexloc torches.They are awesome and the greatest part is you can change from a wp-9 to a wp-17 by just swapping the head.The best torch when it comes to...
Results 1 to 25 of 50
Page 1 of 2 1 2