Search:

Type: Posts; User: performance

Page 1 of 20 1 2 3 4

Search: Search took 0.04 seconds.

  1. Replies
    1
    Views
    71

    Welcome to Everlast.

    Welcome to Everlast.
  2. Have you looked at the manual?

    Have you looked at the manual?
  3. Replies
    1
    Views
    113

    Are you running with the torch in negative for...

    Are you running with the torch in negative for AC? Make sure your work clamp is attached directly to the metal when using other wave forms. Also you may need to check the HF point gap to improve the...
  4. Also don't put your balance above 35%.

    Also don't put your balance above 35%.
  5. No manual. They set up basically like all spool...

    No manual. They set up basically like all spool guns. Simple, straight forward.
  6. Thread: Imig 230I

    by performance
    Replies
    1
    Views
    89

    Not recommended due to the arc force action.

    Not recommended due to the arc force action.
  7. Replies
    2
    Views
    168

    Have no idea what you are referring to exactly. ...

    Have no idea what you are referring to exactly. A 15A NZ plug?. There is NO neutral on a welder. So, maybe in the middle of the confusion about terminology and wiring that's the problem?
  8. First, 3/32 has a limit of about 160 to 180A. The...

    First, 3/32 has a limit of about 160 to 180A. The balling and nodules form from overheating. Yes, the square wave we use has a fast wet in and it has a more sharp shouldered design and it's a little...
  9. Replies
    1
    Views
    248

    If it is the old PP100, if it is NOT the blow...

    If it is the old PP100, if it is NOT the blow back start, innotec pt 100 torch, then it cannot be used that way.
  10. Replies
    1
    Views
    145

    First, get rid of the furick cup and use regular...

    First, get rid of the furick cup and use regular to diagnose issue. Keep tungsten stickout past cup to 1/8" and try it. Make sure torch is in negative (for AC and DC). Set balance for 30%, and...
  11. Replies
    1
    Views
    259

    Yes. There are plenty of videos with our...

    Yes. There are plenty of videos with our machines doing this.
  12. Replies
    7
    Views
    2,427

    Procut? Everlast?

    Procut? Everlast?
  13. This unit appears to be 10 years old or older. ...

    This unit appears to be 10 years old or older. You really should keep in touch with the guys at tech support to continue to get the best help. That is the AC side so they should be able to pinpoint...
  14. Replies
    1
    Views
    462

    You need to switch or use a separate dedicated...

    You need to switch or use a separate dedicated gun. Swapping liners is quick though.

    Yes, use oversized tips, or use a tip the correct size designated for aluminum use.
  15. Replies
    1
    Views
    258

    depending upon what wire you are using (metal...

    depending upon what wire you are using (metal type) it will vary. But typically it ranges between 3 and 5.
  16. Replies
    1
    Views
    306

    Some were both, but if it is 3 phase only, it...

    Some were both, but if it is 3 phase only, it won't do it.
  17. Thread: Storm 215c

    by performance
    Replies
    3
    Views
    442

    I want to emphasize, for the purpose of others...

    I want to emphasize, for the purpose of others reading that I do not mean to convey that the unit isn't commercial in nature or capable of heavy use. It is. But it is for the purposes of types of...
  18. Thread: Storm 215c

    by performance
    Replies
    3
    Views
    442

    It'll do what you want it to. The point of that...

    It'll do what you want it to. The point of that statement is "Do not buy this if you intend to use it solely as a plasma cutter". The design of the plasma is a supportive function to welding. Cut...
  19. Replies
    8
    Views
    813

    Oleg would like to speak with you about this. ...

    Oleg would like to speak with you about this. Please call 877 755 9353 ext 201 asap.

    FWIW, one reason that you should have stood tall on this is that the factory gets copies of serial numbers for...
  20. Replies
    8
    Views
    813

    If you haven't noticed, I work for the company. ...

    If you haven't noticed, I work for the company. So, your attitude and how we will deal with this is noted as well. Will check on this oversight. We will be glad to honor the warranty on anything...
  21. Replies
    8
    Views
    813

    I must say that doesn't speak very well of you or...

    I must say that doesn't speak very well of you or your ethics. They may have upgraded you, but it would have been the right thing to do to contact them about it. If it was a mistake on Everlast's...
  22. Replies
    8
    Views
    813

    Did you let them know?

    Did you let them know?
  23. That's a start for sure. If you haven't already...

    That's a start for sure. If you haven't already join our groups on face book: Everlast Welders and Owners of Everlast Welders
  24. Replies
    3
    Views
    623

    Were you running it on a generator?

    Were you running it on a generator?
  25. Replies
    3
    Views
    1,424

    https://www.everlastgenerators.com/form/product-re...

    https://www.everlastgenerators.com/form/product-registration
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4