Search:

I purchased a 221 STI a little over a year ago. First Arc strike was not good even on DC. Acted as if I did not have enough shielding gas. I talked to tech and sure enough the line was not pushed all...

I find myself at the edge of my 250EX with some of the aluminum projects that have come through here lately. Im thinking about getting a 325EXT for some of the heavier projects.

Yes with or without plugged in. I tried the original Everlast pedal as well and a finger tip control all the same.

http://weldingweb.com/showthread.php?299861-everlast-200dx-low-power-amps-do-not-display Just found this thread and tried everything this guy has tried and the display still reads 007 with finger...

It's been a long time since Ive been on the forum life just gets in the way. So here is my dilemma, My 250EX dated 10-15-2012 is giving my problems. I have not used the machine since May of this...

I dont have this problem when I use my buddy's Dynasty 200 with the same 3/32 tungsten. Is it something Im missing on set up ?

I have a air cooled torch and have this problem at lower amps, I pump the amps up and it goes away. I am using a 3/32 lanthinated. Ill try some of the things that have been mentioned, the machine has...

I have this problem also and have tried all of the above. He machine welds fine but arc is unstable at lower amps. I was thinking its a foot pedal issue and plan on getting the USA made pedal.

Havnt heard the Dave Smith name in many moons !! He did some pretty amazing stuff with the Olds. We are running all small block stuff using the Olds NasCar blocks. I one in the works for a friend out...

Well it is Olds heads but not Battens, but I have had my personal Battens welded between the seats down in the bowls before I got a welder big enough to do it myself. Battens are some pretty nasty...

I have some repairs to do inside the valve pocket on a pair of aluminum cylinder heads. Ive seen some very very small tig torches CK-24 or such. Does Everlast offer a torch this size ? What do you...

Sounds like youve got one cool project coming together, keep us posted on the progress !! My son and I have started his full sized dragster project. We bought a 227" wheel base hard tail that we are...

Looks like a anti-roll set up, whats the project your working on ?

I was hoping to have all this behind me by now, just got the machine back Tuesday, box looked alittle rough opened the box UPS has broke the front bezel and pushed back the connections for the ground...

What are the pros and cons on these two machines ? If you were purchasing a new unit would buy a 210ext or 250ex ?

Still waiting on getting this resolved........

I understand the hard start with the helium mix. Its just another bottle that I had in the shop to try. Ray left a message asking me to try the stick function of the machine, said it bypasses...

I had some time today to use my welder for some race car projects on building aluminum blow by tanks. The arc was somewhat unstable and hard starting. Then about 15 min in I lost arc altogether, only...

I called Friday and the unit did ship out Monday of last week. Everlast sent me the tracking number and it was slated to be delivered today (Monday the 8th). I was in a hurry so I went to the UPS hub...

I did get a call from Everlast confirming the shipping address, and was supposed to ship out Monday (hopefully have it by Friday), but have not received an email with a tracking number. I shipped my...

Hoping to hear something from Ray or Mark soon. I spoke with Mark Monday and he was going to check the status and get back with me the next day or two. Havnt heard anything yet. This coming Monday...

I have called several times and was told it would be fixed in a week or so each time I called. The last time I called I didnt get through to Ray so I left a voice mail with my concerns and sent an...

Still have not heard when I can expect my machine back. I am getting to the point of concern now.

Still waiting on the repair. I was really really hoping to have the machine back by now. I really need to get some of my race car projects done, hate to borrow a welder or pay to have it done.

Well I have sent the machine to Idaho for work. What really irritates me is that it cost me 97.05 at UPS to send the machine in, not happy about the cost !!!!!!! The first machine I got back in July...