Search:

Did you know,,,, that you can take a panel to the Auto Paint Store and they use a camera that analyzes the color really closely. THEN, at least the one I goto, they can mix the right color for you...

The Inverters?

The Amazon link I posted says it's < 3% THD...

So first realize that Aluminum is Very Different. You say "nothing over 1/4" but while 1/4" in steel is not all that taxing for a welder, in Alum it iS...

Lower your expectations or raise the...

What has the world become? ;)

Well, I can see that you're Very Impressed,,, after all if it's deemed a necessity by Miller, then it must be an Important feature ;)

I do like the wave modifications in my 255EXT, as you say,...

Oh! This is Great,,, we now have the "Answer to the Nonexistent Problem" (well, I guess it would exist if you, for Some Reason, wanted to run 50/50 Balance)

Let's all run out and Buy a Machine...

I've always followed that, if you're going to run a wire between a 50A Breaker and a 50A Receptacle,,, it should probably be a Wire Rated for 50A ;)

A lot of guys over at WW are happy with this generator for welding...

https://www.amazon.com/dp/B083V8VNGL

I don't mean to derail this discussion,,,, but, Insurance regulations don't favor 6010 for some reason??? (not sure what "all the way out" means)

Do I completely misunderstand what you posted ;)
...

Don't forget that you the option of using the watercooled torch without a cooler though. All it takes is that you connect your torch to a water supply...

Coolers are a nice self-contained,...

Don't Do It!... ;)

Just Replace the tank.

Yes, but DexCool doesn't have those...

I'm tellin' ya, the MSDS (now SDS) of DexCool and Millers coolant are the same ;)

DexCool isn't like other automotive coolants, it's actually been identified as being identical to Millers coolant ;)

DexCool and distilled has worked for me for a very long time....

Naaa...

So let's hope that the resistor is now OPEN and unable to pass current. Typically, there is something downstream that's shorted-to-ground and forcing that resistor to carry many times it's...

Yea,,, you know that's Not the way it works ~ right ;)

That resistor is very unlikely to be the Problem, but rather the the Result. Change it and, chances are, the new one just overheats again......

It's much more complicated than that though...

Some stainless is magnetic, some is not (remember not only Iron is magnetic, but so is Nickle) and the various "blends" called Stainless (sometimes...

SO MUCH is missing from that....

Once you start pulsing, and reduce during the background settings, you have to recalculate what your Total Amps needs are (if you normally need 75A and reduce the...

As someone who has one ;)

I asked the very same question after receiving mine. There is something Very Different about those settings, that for some reason, seems to be kept secret...

Their...

When you say you have experience with Oxy Acetylene, is that just cutting or do you have welding experience with it?

If you can "Gas" weld, you'll find you have a tremendous leg-up on most for...

Good discussion on this 30A conversion -> https://www.everlastgenerators.com/forums/showthread.php/5068-30A-fitted-to-MTS250S

Apparently, Newby doesn't recognize a Troll when he sees one...

DON'T FEED THE TROLL!

Not sure what welder you're using (at the time I made these notes to myself I had a PP256 with "knobs" ;). I was experimenting with .22ga Alum, you'd just have to increase the #'s to do 1/8th (I...

Here's the scoop, while Everlast makes a great welder, their "human" side is just So poorly run...

The problem is actually At-the-Top (Oleg - the Owner). He has instilled in his employees that...

I made an Extension Cord for my pedal. You can buy both a Male & Female plug to match what your machine & pedal use and put on either end of a cable like this ->

...