Search:

Type: Posts; User: performance

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. Replies
    1
    Views
    61

    No. Not at this time. I guess we don't have...

    No. Not at this time. I guess we don't have maybe 3 or 4 requests each year, or at least I don't come across that many.
  2. Replies
    1
    Views
    52

    Welcome. We are here to help.

    Welcome. We are here to help.
  3. Replies
    2
    Views
    53

    Call the guys at 877 755 9353 ext 207. It sounds...

    Call the guys at 877 755 9353 ext 207. It sounds as if the breaker is tripping and you have a bad pcb or igbt in the unit.
  4. Replies
    12
    Views
    191

    Yes, there is a separate part for AC. But it...

    Yes, there is a separate part for AC. But it would be repaired, not replaced as the components are replaceable on the board on that machine.
  5. Replies
    12
    Views
    191

    The AC side of the inverter sounds like it has...

    The AC side of the inverter sounds like it has had it. You need to talk with the guys over at ext 207.
  6. Replies
    7
    Views
    294

    If you've over flexed the torch, you could have a...

    If you've over flexed the torch, you could have a small crack in the neck.
  7. Replies
    7
    Views
    294

    Looks like mixed gas, or your welder is too close...

    Looks like mixed gas, or your welder is too close to where you are welding, or it is contaminated gas.
    And clean that mill scale that isn't quite clean yet.
  8. Replies
    6
    Views
    225

    No. This is screen printed on.

    No. This is screen printed on.
  9. Replies
    6
    Views
    225

    Its RAL 6018. We've put that paint code on here...

    Its RAL 6018. We've put that paint code on here somewhere.
  10. Replies
    6
    Views
    225

    If its fairly new, call and ask about warranty on...

    If its fairly new, call and ask about warranty on the cover.
  11. Replies
    0
    Views
    175

    Water Cooler Blow-Out...sale

    For those of you needing a water cooler we've had quite a bit of new ones shipped in. Some one added an extra zero to the order? lol. Anyway, there are a lot of them, and we need the space in the...
  12. Replies
    2
    Views
    251

    The 200 is the better of the two.

    The 200 is the better of the two.
  13. It sounds as if it is in 4T. Move to 2T or pedal...

    It sounds as if it is in 4T. Move to 2T or pedal mode. Unfortunately that factory folded up as far as I know. We moved production to our other factory in 2012.

    Now, if it has failed, I do...
  14. Replies
    1
    Views
    192

    They will until they go out of business doing it....

    They will until they go out of business doing it. If the unit failed after shipping it back to you, then you need to contact the company direct. They don't make you pay shipping again if it was...
  15. IF a customer wants to keep their warranty in...

    IF a customer wants to keep their warranty in effect, then they should follow our advice. You can bet and suppose a lot here. Fine, but when it comes down to it, use the stuff that the industry...
  16. Replies
    20
    Views
    6,160

    I'm sorry MC5W. But lets not revive 5 year old...

    I'm sorry MC5W. But lets not revive 5 year old threads.

    Inverter welders can use lower amperages because of Arc force, but that will depend upon the settings. 90 amps is still 90 amps. It...
  17. Replies
    1
    Views
    141

    No. The torch stays in the negative for all TIG...

    No. The torch stays in the negative for all TIG operation. Download your manual from the website. It is up on it. It covers pretty much everything as far as setup....
  18. Spot settings will get you everytime.

    Spot settings will get you everytime.
  19. Inductance 75%. Start there. The results will...

    Inductance 75%. Start there. The results will vary based off the user's experience in setting a manual pulse. The 350P is a type of synergic pulse. It doesn't really equip you to set the manual...
  20. Replies
    1
    Views
    288

    The board sounds dead. You have a five year...

    The board sounds dead. You have a five year warranty on the unit. Call 877 755 9353 ext 207 to initiate a warranty claim and for further diagnosis. Depends upon how long you've had the unit, but...
  21. Depending upon where you are, you will also save...

    Depending upon where you are, you will also save the tax.
  22. You'll need about any 60 gallon compressor to...

    You'll need about any 60 gallon compressor to keep up.
  23. Mike, Let's keep things simple here. I...

    Mike,
    Let's keep things simple here. I understand what all you are saying, but if you want to be helpful, boil it down, without all the jargon. That's what people need here, not a master's thesis....
  24. It'll make your starts worse. It may be working,...

    It'll make your starts worse. It may be working, but it isn't recommended. It can cause hose leaks.
  25. First, We do not recommend you retrofit anything...

    First, We do not recommend you retrofit anything to our welders. That can and will void the warranty, especially when it is damaged.

    The DINSE configuration is the most widely used plug adapters...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4